Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Kelton Hollower?

Posts

Kelton Hollower?

#1

Kelton Hollower?

Ron in Drums PA

>I've been hearing allot about the Kelton hollowers.

I have Don Pencils mini set of hollowers and I think they are great, but I'd like to try something a little different and bigger.

I'm not sure which set to start with. What size turning range does the 5/8" x 15" have?

I'm assuming these tools will fit into the same handle as the kelton coring tools. Would a second handle would be nice?.

Last question, How do you sharpen these?

TIA

Re: Kelton Hollower?

#2

Re: Kelton Hollower? *LINK*

Carole Valentine

>Ron,

Apparently there is a "rule of thumb" that says you should be able to hollow to a depth of 15 x diameter with a given bar size. That would give you a working depth of somewhere around 9.5" with the 5/8" hollowers. I have 3 sets: the minis, the small and the medium and love them. You sharpen them by using a stone or diamond card to create a burr. Apparently the flat top surface on the tool has a layer of specially hardened steel so, though you may need to occasionally hit this lightly with a file to remove an old burr, you don't want to be aggressive with this part. I have included a link to a page by Lyn Mangiameli discussing usage of the tools. There is also and article in the WC reviews section I believe.


Tips on Using Kelton Hollowers

Re: Kelton Hollower?

#3

Re: Kelton Hollower?

robo hippy

>A friend of mine loaned me his large set (3/4 in) because he doesn't do larger pieces. I made 4 Myrtle hf pieces up to about 10 inches deep, and the tools worked well. I had so much fun, that I ordered the whole set on Monday. They have sleeve adaptors so that you can use the KM coring handles on the hollowers. I did rig up a laser pointer over the cutter which is very handy, but is top heavy. When the new ones get here, I will adapt the Jaimeson style handle that I have to the McNaughton system. I want the bar to be hollow, so that I can slide the cutters in and out to the desired depth, and this should allow me to extend farther out over the tool rest. It can be used just in the round handles, but it takes a lot more work/effort to work the tool, and the pointer will stay better on the D handle.

robo hippy

Re: Kelton Hollower?

#4

Thanks Carole and Robo

Ron in Drums PA

>