Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Hackberry

Posts

Hackberry

#1

Hackberry

Don Tewell

>With the strong winds coming through on Sunday PM, I now have a lot of wood. Most of it laying in my front lawn. Fortunetly, it missed my house and the neigbors auto. My father in law says it's hackberry and from the sites I've seen on the internet, I pretty sure it is. I've never turned hackberry. Is it worth turning or firewood? Any help greatly appreciated.

Re: Hackberry

#2

Re: Hackberry

Jerry-Huntsville, AL

>Don

I have turned some hackberry and have had good results. It is on the soft side, spalts easily, and finishes nicely. I have not had any problem with it splitting except on very large pieces that were already suspect. Good wood to practice with if nothing else.

Jerry

Re: Hackberry

#3

Re: Hackberry

Allen Neighbors

>If it is the same that we call Hackberry here in NW Texas, it's gorgeous, colorful, wood. I've made numerous bandsaw boxes from it. It has soft areas and hard areas, but scary-sharp tools should make it workable. Reddish streaks and tan streaks. I'm look for more of it when I go out cutting wood, just haven't found any around here close.

Allen

Re: Hackberry

#4

Re: Hackberry

Gary Evans Tallassee, TN

>Hi Don,

Hackberry is one of my favorites. I don't think what we have in East TN is the same as what they call hackberry in W. by-gosh Texas, though. Ours is creamy white when cut, with a ring-porous endgrain like ash. If left outside it soon develops a lovely gray stain and can produce some beautiful black-line spalting.

I'm not the only one who likes it, either. I took several pieces of spalted hackberry to the Southern States Symposium the first year I went. One guy bought all 8 or 9 pieces that I had with me within about half an hour of the time I started setting up. I was kicking myself the whole weekend for not bringing more. It always sells well at the shows.

It also makes decent firewood, but it is not terribly dense, about the same as cherry. I wouldn't burn any of it until you have to.

Gary

Re: Hackberry

#5

Re: Hackberry

John Lucas

>Spalted hackberry is one of my favorite woods. coat one end with end grain sealer and put the other end on the ground. It will spalt quite readily in 6 months or less, maybe even 3 months.

Re: Hackberry

#6

Re: Hackberry

Don Tewell

>Thanks, all. I'll have to try Johns' suggestion to spalt some. If nothing else I have a whole lot to practice on.

Re: Hackberry

#7

Re: Hackberry

Mike Brazeau

>Don - one of my favorite bowls that I have done is a little Hackberry natural edge that I turned from some wood I got off our raffle table about three years ago. As stated earlier, grain very similar to ash. It is quite hard when dry. Beautiful rays. This bowl was from limb wood and is about 6 " long and 2 1/2" high.


img

Re: Hackberry

#8

Re: Hackberry

Phil Joines Krum, Tx

>Being such a light colored wood it's good for coloring and pyrograhpy too.

Re: Hackberry

#9

Re:Our KY version of Hackberry....

JamieDonaldson

>....is also one of my favorite turning woods. Although a member of the elm family, it looks like ash and is also called "sugarberry" and attracts carpenter ants which frequently hollow out larger trees. It is a "spalter's special," especially when you add a mixture of Miracle Gro and beer- put in a plastic bag and turn end for end every few weeks, but check often because it doesn't take long!! This image is one of my favorite pieces, and shows both spalting and ant hollowing- they work cheap!


img

Re: Hackberry

#10

Re:Our KY version of Hackberry....

Allen Neighbors

>That's gorgeous, Jamie. What a nice piece! It doesn't look anything like what I've been told is Hackberry.

Allen

Re: Hackberry

#11

Re: Hackberry

Don Tewell

>Again, thanks for your input. Especially, the pics. Gives me something to aim for. Hope my wife doesn't see the pics, don't know if I can produce something that nice.