Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

spindle copy fingers

Posts

spindle copy fingers

#1

spindle copy fingers

Bob Sheppard

>I do a fair amount of spindle duplicating, and would like to get some copy fingers. the only place I've been able to find them is from Craft Supplies UK, but they're $12 apiece, without shipping.Does anyone have another supplier, or plans for them?

Thanks.

Re: spindle copy fingers

#2

Keith Tompkins

Re: spindle copy fingers

Keith Tompkins

>Hi Bob, traditionally they were called semaphores, very easy to make a set yourself.

Re: spindle copy fingers

#3

Re: spindle copy fingers

john lucas

>Bob Just make them. My friend Joe Looper had to make 50 ballisters and he built a set of copy fingers by bending coper wire . He installed these on a piece of threaded rod with nuts to hold the wires in place. You can easily bend them to fit the dimensions of the piece.

Re: spindle copy fingers

#4

Re: spindle copy fingers

john lucas

>I forgot there is another method I just saw that is even better. I made a copy of the article but I'll have to dig it up. Basically you mount a drawing and then a cut out of the same drawing about 2 inches apart. You simply sight over the cut out and align the parts. This solves the problem of parallax. I'll go look for it in a while and see if I can find the article.

Re: spindle copy fingers

#5

Re: spindle copy fingers

Bob Sheppard

>That's probably what I'll do. But it seems like I never have enough time to finish the projects I've already got started, let alone a new one. But I don't have any duplicating jobs in the near future, so maybe I'm OK.

Re: spindle copy fingers

#6

Re: spindle copy fingers

Bob Sheppard

>I'd appreciate that. I'll probably end up making a set, but the copy thing sounds like an interesting technique.

Re: spindle copy fingers

#7

here it is  *LINK*

john lucas

>


http://www.delorie.com/wood/tips/parallax-jig.html

Re: spindle copy fingers

#8

Re: spindle copy fingers

Phil Joines Krum, Texas

>They are easy to make with threaded rod and coat hanger wire. Bent an eye in one end of the wire and an L in the middle so you can adjust the length. A couple of L shaped wooden brackets to bolt it to the bed. Nuts keep the wires from moving sideways but the wires need to be free to swing.

I've seen them made from flat bar but the wire works as well and doesn't take nearly as long to make.

Re: spindle copy fingers

#9

Re: here it is

Bob Sheppard

>Thanks!