Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Questions for Traveling Demonstrators

Posts

Questions for Traveling Demonstrators

#1

Questions for Traveling Demonstrators

Bill Grumbine (Kutztown PA)

>Greetings all

I am finding myself in the position of doing more and more traveling for demonstrations, and I have some questions I would like to ask of those of you who have experience with this sort of thing. I am posting here publicly for the purpose of reaching as many people as possible, but I think it would be more appropriate to discuss this off line. If you are a traveling demonstrator and would not mind talking with me about your experiences, please email me at my address above.

Thanks.

Bill

Re: Questions for Traveling Demonstrators

#2

Re: Questions for Traveling Demonstrators

Dick Gerard

>Bill, give me a call or an email. I will be happy to talk about my past experiences as a travelling dog and pont show ... uh, er, I mean demonstrator.

Re: Questions for Traveling Demonstrators

#3

Re: Questions for Traveling Demonstrators

Gary Evans Tallassee, TN

>Hi Bill,

I personally don't think it would be inappropriate to post your questions and responses here. I have done a couple or three demos and would be interested in this particular topic.

Gary

Re: Questions for Traveling Demonstrators

#4

Re: Questions for Traveling Demonstrators

RussFairfield

>I have have 4 things to offer from the few demonstrations I have given.

1.

Be flexible. Be prepared to change the content or format of the presentation to suit changes in time or space. If you need a lathe, be prepared to do it without one. Things have a way of changing, locations change, things are forgotten, and things are lost.

This is the most important factor if you are traveling via air or anything other than your own vehicle.

If you are using your own vehicle to travel, then there are a couple other things that can be important to making a good demonstration.

2.

Be self sufficient. Don't plan on the host club having anything available. I carry my own chuck and all of the common adapters. Things have a habit of not being there.

3,

Furnish your own wood. Bad wood will make you look bad. Good wood will make you look good, and the only way to know what you are getting is to carry your own.

4,

If you need a hand truck to move stuff, bring your own. Every time I had to use someone elses hand-truck, it had at least one flat tire and the air compressor didn't work.

Re: Questions for Traveling Demonstrators

#5

Re: Questions for Traveling Demonstrators

Bill Grumbine (Kutztown PA)

>Thanks everyone for your responses so far! I have gotten a lot of emails and will be responding later on today.

For Gary, and maybe others who are wondering why I asked for emails, I am more interested in the traveling part and the business end of things than the demonstrating part. I have been demonstrating and teaching since 1995, but now the travel is adding a new component. I will be glad to summarize what I learn, but I thought it might be better handled off line.

Russ, you had me laughing at some of your comments. Boy do I know what you mean there, and I will be responding via email as well.

Dick, I will be sure to spend some time with you.

Right now I feel like the rabbit in Alice in Wonderland. I'm late, I'm late, for a very important date, and with me I have to worry about fitting through that hole! ;-)

Bill

Re: Questions for Traveling Demonstrators

#6

Re: Questions for Traveling Demonstrators

Ed Moore

>Hi Bill,

As a Program Director for a club, I would appreciate learning about the business side of things. And I think that there are plenty of people who do not understand that when one travels for a day, does an all-day demo and returns home the next day, the demonstrator has three days PLUS PREP TIME invested in the venture. They deserve fair compensation for their time. For that reason, I take the demo fee plus the travel costs and look at that total. If the total seems about right, then it's a "go", if it is out of line, then I duck the situation. I choose not to ask a demonstrator to adjust their fee if I think it is a little "ambitious".

Where I think a demonstrator must be careful is when more than one club and demo is involved. I hosted a touring demonstrator in my home and since he was going to be there anyway, I arranged a workshop in my shop as a kindness to him and to allow him to pick up a day's pay. Suddenly I found myself being assessed travel fees, which I felt were not part of the picture since he was being paid by another club for his demo and was already staying in my home anyway, plus I didn't take a penny for the use of my shop and the wood I supplied. We got things worked out by increasing the cost to attend a little and picking up a couple extra people. The second situation that must be avoided is "double-dipping", where a demonstrator receives full travel expenses from two clubs for back-to-back demos that are not very far apart. I know of a couple of name demonstrators who have tarnished their reputations by doing this.

And since the Smith Mountain Lake Woodturners are extremely happy to be hosting Bill Grumbine on Saturday, May 13, let me point out that none of the negatives mentioned here apply to Bill, which is why I felt free to write what I did. If you are interested in attending Bill's demo I am sure that I can find a place with a club member for you to stay over on Friday evening, to allow you to attend the demo Saturday. The fee for attending is very modest. If you can't attend and feel a need to send the money anyway, please contact me privately.

;^D

Ed Moore

PS: I also posted this on another forum where Bill posed the same question.

Re: Questions for Traveling Demonstrators

#7

Re: Questions for Traveling Demonstrators

Clay Foster

>I'll be glad to tell you about my experiences.

Re: Questions for Traveling Demonstrators

#8

Re: Questions for Traveling Demonstrators

Steve Worcester

>Come on Clay, I want to hear them too!

Steve Worcester

www.turningwood.com

Re: Questions for Traveling Demonstrators

#9

Re: Bill, I'm a 2-year novice...

Allen Neighbors

>but I'd like to hear about these things, too, and I'll bet other turners would, also. If some of us tightwads could hear what ya'll go through to help us out, it might help some of us decide to go ahead and part with the cash. Know what I mean????

JTMHOO (just the most humble of opinions)

Allen

Re: Questions for Traveling Demonstrators

#10

Re: Questions for Traveling Demonstrators

Clay Foster

>Steve,

There have been adventures and challenges, but so far never a miserable experience. Some of the most challenging experiences were the early years of the AAW symposiums. The more entertaining stories involve airlines and custom agents. Being a dumb ignorant Texan can get you out of a lot of difficult situations. Well, except for Iraq.

The financial rewards are not great, but the people you meet are what creates good memories. I am definitely not a people person, but people I now consider to be good friends I meet while travelling around doing demos.

Re: Questions for Traveling Demonstrators

#11

The problem is:

TDaniel

>Travelling is expensive and add to that the lost time from producing and you can see that going out to do a demo is not a money maker. Example: If I go to Charleston, SC to do a demo it is a day's drive down and a day back. It takes me a day to prepare for the demo. The demo takes a day. When I get home I am dead tired from the drive so I don't do much the day I return. That is 5 days lost production. Add to this gas at $2.50 a gallon and the cost of maintaining a vehicle suitable for travelling and you can see that it is no money maker. Now if I can pick up another couple of demos while on the trip then I can cut my cost by half or better. To get good demos at a reasonable price we must work with other clubs to share these expenses.

Re: Questions for Traveling Demonstrators

#12

Re: Bill, I'm a 2-year novice...

Bill Grumbine (Kutztown PA)

>Hi Allen

I am working on responses to all who wrote me. In essence I am asking for expriences from others who have done longer trips with multiple demonstrations on each trip. I have been as far away at Toronto and Indianapolis to demonstrate, and have been demoing since 1995, but now comes the complexity of coordinating even two clubs! As I get more info I will publish what is appropriate to the questions.

Bill

Re: Questions for Traveling Demonstrators

#13

Re: Questions for Traveling Demonstrators

Bill Grumbine (Kutztown PA)

>Thanks Clay! I am sending you an email.

Bill

Re: Questions for Traveling Demonstrators

#14

Re: Bill, this compilation of road...

JamieDonaldson

>.. trip adventures and advice could be great reading, as well as a guide for future demonstrators. I don't recall any such info being available, and it would also help clubs make plans when seeking demos from gypsy turners.

Re: Questions for Traveling Demonstrators

#15

Dumb Texas

Stuart Johnson

>Being a dumb ignorant Texan can get you out of a lot of difficult situations.

It didn't help me when I told the guard at your exhibit in Little Rock it was okay for me to take pictures because I was from Texas.

Re: Questions for Traveling Demonstrators

#16

Re: Bill, this compilation of road...

Carol from AZ

>From someone who has been a gypsy woodworking instructor locally, regionally, and nationally, I have a suggestion. There is information that is relevant to the demonstrator only and not to the group doing the hiring. However, there is a body of information that hiring groups/individuals would be wise to have. Or maybe it is stuff I wish they knew beforehand.

I would be willing to contribute information that comes under the heading of, "So you want to hire a demonstrator for your club. What do you need to know?" I would bet there are other demonstrators that have informationt they wish the hiring organizations had as well. That would be worthwhile for the archives here I would think.

Re: Questions for Traveling Demonstrators

#17

Re: Bill, I'm a 2-year novice...

Mark Kauder, Phenix City, AL

>Bill,

I think one of the keys for you, is to ask the local clubs to help you arrange demos at other local clubs. It can be and incentive for them to cut their costs. I know that down this way, when one of the local clubs gets an outside demonstrator, they contact the other 13 clubs in the network and let them know - either to get members to come to their demos/hands-on, or to ask if any other clubs want to have the demonstrator at their club and split the travel.

Mark