Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

paddle wheels

Posts

paddle wheels

#1

paddle wheels

John Lucas

>Russ I pulled out my old paddle wheel sanding discs to give them a try again after your post last week. I don't know what I did differently than the last time I used them but I didn't have any trouble and was able to sand out the chatter marks on the inside of box. I was getting some chatter no matter how sharp my tools were and how careful I was, even holding the outside with my hands. I got rid of 90 pecent of the bad places with a good sharp bowl gouge but right near the lip was fighting me no mater what.

One of my wheels is 120 grit the other is finer but not marked. I cleaned it right up with these. Thanks for getting me back in the groove with them.

Re: paddle wheels

#2

Re: paddle wheels

RussFairfield

>Most people who tell me that flap-wheels don't work are trying to run them backwards