Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

What am I Missing?

Posts

What am I Missing?

#1

What am I Missing?

Wayne Kuhn

>Things I have expierienced since aquiring this new addiction in January.

I bought a new lathe, a couple of new turning tools, put together a buffing system.

Built a vacuum chucking system, a donut chuck, and a friction chuck, I have successfully used all.

Used my penn state $45.00 chuck to turn with recess and tenon (prefer the tenon.)

I have revised my sharpening technique using the wolverine system, And doing it much more often.

I am tripping over roughed turned bowls waiting for them to dry.

I have turned some bowls to completion and buffed with and without an oil finish.

I have scoured the neighborhood for fresh cut lumber,(always on the lookout.) I have pulled over to side of road to ask tree cutters if I could have a log or two.

I have sent almost complete bowls flying across the shop in multiple pieces, gouged many with catches when try to make that one last final pass, some saved.

I have hit the above chuck with my tools while turning.

I have slammed my index finger between tool and toolrest when a catch set me to the wrong side of the bowl blank.

I have felt the exhilaration of showing my completed piecces to SWMBO with the reply "Can I have this for my desk at work?

I have spent a day that exceeded all of my expectation with Ali Aviasera, finally learned how to properly use my skew chisel without the dreaded fear of the past. BTW, Thanks Ali, Chris K. and Troy B.

I am a member of Baltimore Area Turners And showed my first completed bowl at the last meeting. I also look forward to every meeting.

I read this board and others every day, with occational postings and questions. I truly believe there is great info here from one and all of the really decent people who visit these boards.

I read all I can about turning, and have watched turning videos multiple times.

I have not attempted hollow forms or segmented turning yet, tool budget has to be revised for that. I also want to get more comfortable with turning bowls to completion before I take on a new challenge.

Other than Hollow forms segmented turning and making my own turning tools, What do I have to look forward to?

BTW, I am not bored with turning, I am very much looking forward to my unknown upcoming new expieriences with my turning addiction and continuing to practice with what I have learned so far.

So what am I missing?

Re: What am I Missing?

#2

Missing?

TDaniel

>Practice time; you'll never get enough of it.

I made bowls-only for years before getting into hollow forms and it is amazing how your work will keep improving in tiny little ways that eventually add up to perfection. Don't rush the hollow forms; take your time doing bowls and open top vessels, then you can go to lidded vessels and boxes. These will help you gain confidence and skill with your tools. Ignore the mags that feature primarily enhancements, concentrate on skills and a perfect finish....much later you may want to try some enhancements but I see far too many pieces that show that the turner spent far too much time on the enhancements and far too little time on the turning. This is not a stab against enhancements; just a warning to not go there too quickly.

Re: What am I Missing?

#3

Re: What am I Missing?-Turners Elbow!

Derek

>

Re: What am I Missing?

#4

Amen TD!!

Molly Winton

>

Re: What am I Missing?

#5

Re: Wayne- I didn't see any....

JamieDonaldson

>....mention of whether you are having FUN! There are always new woods to explore, new tools to master, but it comes down to having a good time with your activities and newfound friends. Are you coming to the AAW Symposium in Louisville in June- just check out the exhibits in the Instant Gallery for inspiration.

Re: What am I Missing?

#6

Yeah, but wait until you get hooked!

David Breth

>

Re: What am I Missing?

#7

Re: Missing?

Mac

>Almost sounds to me like the fella that only turned bowls may be well on the way to trying a few enhancements that he said he would never do....eh?

Re: What am I Missing?

#8

I ain't gonna live this down am I?

TDaniel

>OK, I confess. I spilled a little food coloring on a bowl that had a top on it. Of course I had turned about 2000 bowls before I tried that, er, before that happened I mean. :)

Re: What am I Missing?

#9

Re: I ain't gonna live this down am I?

Mac

>Nope..................

Re: What am I Missing?

#10

Keith Tompkins

Re: I ain't gonna live this down am I?

Keith Tompkins

>Terry....First dyed forms....then, a Japanese truck, WHAT NEXT? I can hardly wait! btw, I have a really neat beret if you are interested....

Re: What am I Missing?

#11

I ain't got no Japanese truck

TDaniel

>My son bought one, not me. I am driving my 55 Ford pickup. I'll take you up on the beret but you can keep those yellow leotards.

TD

Re: What am I Missing?

#12

Re: Wayne- I didn't see any....

Wayne Kuhn

>Jamie, I am having fun. Lots O'fun. Practicing is basically what I am doing. When I try to get too serious-not fun..frustrating.

I have a woodshop to relieve stress not bring more on. After attending the work shop with Eli last Monday I came home and went right to spindle turning with my skew. As Ali said "you go home and make chips, just chips" which is what I am doing now. Just making chips and resisting the urge to make a candle stick or what ever happens to come of my practice sessions. Just chips.

It works, my confidence with the skew is ever increasing.

Sharpen and make chips. Sharpen and make chips. Sharpen and make chips. Kinda like wax on, wax off.

Still I have the urge and desire to continue with turning simple bowls.

I actually designed a flat ww piece yesterday for my shop. I gotta have a place for all this new turning stuff I am aquiring.

Sharpen, make chips. Sharpen, make chips. Wax on wax off. Slow and steady wins the race.

Re: What am I Missing?

#13

Re: Wayne- I didn't see any....

Chris K in MD

>Wayne,

Glad you enjoyed the class, there is alot of good advice already given to you here. Paitence grasshopper there is so much turning to do there will be a lifetime of "missing" things for you to learn practice and master. Just keep having fun.

Re: What am I Missing?

#14

Keith Tompkins

Re: Chartruse! : )

Keith Tompkins

>

Re: What am I Missing?

#15

Re: Wayne- If you want to have fun,.....

JamieDonaldson

>....then put that infernal skew back in storage!! I have been turning for 20 yrs. and have no need to punish myself with that weapon, and have never felt the need to torture myself enough to master it when I can use other tools to perform the same tasks!

Re: What am I Missing?

#16

Re: Wayne- If you want to have fun,.....

tek-Brunswick, Ohio

>Aww Shucks Jamie! I thought that I was having fun with my Skew! For some jobs it is the easiest tool to use and gives the best results. I've seen some of your work; it's hard to believe you are intimidated by the skew.

Tom

Re: What am I Missing?

#17

Re: Wayne- If you want to have fun,.....

Wayne Kuhn

>Jamie, I just learned how to turn beads with the skew, actually very easy. I have not mastered it yet but am working on it. I also have not used it to finish the outside of a bowl yet but I am planning on practicing that also. Th skew really leave a nice finish on the wood.

I am not saying other tools won't or can't. I am just happy to rid myself of the dread of the dreaded skew.

Yes, I am having fun. lots, just ask the LOML.

No, I will not be going to Louisville, maybe next year.

Re: What am I Missing?

#18

Re: Wayne- If you want to have fun,.....

tek-Brunswick, Ohio

>I love the Skew for spindle turning, but I have never used it on a bowl except to cut small grooves with the point and clean up the tenon. I'm not sure what the proper technique would be since the grain runs 90 degrees to spindle turning. I'm not sure, what would the advantage be to use a skew on a bowl? What can it do better, on a bowl than a good bowl gouge and a good Shear scraper, like John Jordon, Al Stirt, and Del Stubbs all had success with?