Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Steady Rest and outriggers

Posts

Steady Rest and outriggers

#1

Steady Rest and outriggers

georgetroy

>I have been turning a series of segmented vases with and with out lids to be added later. I use outriggers on my tools extensively, I find they really help reduce torque and with arthritic hands you need all the help you can get. In order to use the outriggers and the Oneway steady rest I have to put it on the back side of the project instead of front. I have also discovered I can not tell the difference in the effect. Results are still less vibration and wabble tendency. You can also go a little faster and harder if you really want to do so. In the photo you will see my 18"x25" Robust lathe, Oneway steady, Al Basham 5/8" outrigger setup, John Lea tool with outrigger and a John Jordan hook tool with outrigger. I thought this setup might be of interest to those who want to do some in the middle hollowing and semi-hollow forms. I do have a Kelton setup and some more heavy duty hollowing tools not shown. For convenience the Remote contol is a godsend. GT


img

Re: Steady Rest and outriggers

#2

Re: Steady Rest and outriggers *

Terry Quiram, Roanoke Illinois

>George

Nice set up. From the looks of the wall you have turned some sloppy ones as well.

Terry

Re: Steady Rest and outriggers

#3

Re: Steady Rest and outriggers

Bill Crommett

>I wish my outriggeers looked that good. I always figured that if the ooutrigger stayed connected that it was a good welding job, regardless of the looks.

Re: Steady Rest and outriggers

#4

Re: Steady Rest and outriggers

Joel Hunnicutt

>Interesting pic George. I have a couple of Bashams hollower and really like them. My biggest problem is the outrigger getting in the way of the steady. I will try it your way. I jsut assumed that the wheels of the steady needed to back up the cut, so I have never postioned the steady on the other side.

Re: Steady Rest and outriggers

#5

Re: Steady Rest and outriggers

georgetroy

>I'm trying to figure out why it works like it does. Doing a big segmented urn now on one of my other lathes(Vicmarc 300). I will post results on another thread. I just check my size the Urn is 13" from the tool rest Diameter is 8". Mounted on a Oneway chuck in this case. I think the steady must use the opposing force to keep alignment and vibration reduced. GT