Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Just about bowls

Posts

Just about bowls

#1

Just about bowls

Jim King

>As we had an excess of Bloodwood log slices for end turned bowls and we needed a work bench for the wood ID lab these slices with sapwood, wormholes and all turned into a work table. I would guess it weighs a solid 400 pounds. It certainly is not a turning but I thought it would be interesting to some. Six foot long.


img

Re: Just about bowls

#2

JL

Re: Green with envy..

JL

>that's a mighty pretty fixture for just identifying wood.

Re: Just about bowls

#3

wait just one minute there fella

Tom Sontag - St. Louis

>That is gorgeous! But I cannot let you off with such a cursory explanation. What kind of finish is that and how are you going to keep those chunks from splitting? Was the wood already dry?

Nice work!

Re: Just about bowls

#4

Re: wait just one minute there fella

Jim King

>Tom: The log slices were air dried on stickers a couple of years and then a good time in the kiln also. All are put together with 1/2 inch rebar going in 3 inches and criss cross 1/2 inch bloodwoodwood boards for bottom support all with screws and glue. The joints were routered out with a 1/4 inch bit and filled with fiberglass resin mixed with fine sawdust.