Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Lonworth Chuck

Posts

Lonworth Chuck

#1

Lonworth Chuck

RPE

>The recent pictures of the Longworth chuck have really piqued my interest. I live in rural Oklahoma and I don't think Woodturning Design magazine is avalible in my city and I'm not a subscriber. I was wondering if anyone out there would scan the plans from the magazine and email them to me? I'd be much appreciative. It was in the Winter 2005 issue.

Use the email address above but remove the (Remove).

Thanks

RP

Re: Lonworth Chuck

#2

Re: Lonworth Chuck *LINK*

Craig Daymon

>Why not go to the website and request the back issue? Then there would be no potential violation of copyright laws.

http://www.woodturningdesign.com/

Though, there are plenty of internet pages that describe how to make one, so the article from Woodworking Design should not be necessary. I think someone has already stated that there are plans for one in the Article section of this site.

You can also find several articles on building a Longworth Chuck on the Woodturning Online site in the 'Articles and News' section. The link is below.

-Craig


Woodturning OnLine

Re: Lonworth Chuck

#3

Re: Lonworth Chuck

Vicmarc.fan

>Did ypu notice this Longworth has 6 stoppers not four like in the article?

Re: Lonworth Chuck

#4

Re: Lonworth Chuck

Craig Daymon

>I didn't notice, I was simply pointing to another source for plans. Actually, there are 2 articles on the Longworth chuck on Woodturning OnLine. Do BOTH of those articles use 6 buttons instead of 4?

-Craig

P.S. I'm sure there are plenty of directions on the net for both 4 and 6 button versions of the Longworth. I think there is even an "official" site.

Re: Lonworth Chuck

#5

Re: Longworth Chuck

Al Crandall (NE of Indy)

>Mine is 20" diameter. Six buttons looked like they were too far apart when out at the rim, so I made it with eight buttons. Four of them go to center and four stop at about 8" or 9" diameter.