Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Gonna float this to see interest....

Posts

Gonna float this to see interest....

#1

Gonna float this to see interest....

KurtK in Indy

>Hello folks. Some of you do and most of you don't know that I have a friend with a veneering company. They are a pretty big outfit and he calls me when he gets some very interesting cut offs. I stopped by to see him today and got a couple nice slabs of claro walnut crotch with some burl in it also....needless to say, it is magnificent.

He then asked me if I was interested in a stockpile of walnut he had been personally saving for his own use for the last several years. he showed me this pile of walnut slabs and I kinda fell over when I looked at some of the grain and figure. I mean...it's all over the board as far as nice big pieces and also flitch type pieces that would make beautiful platters. I would say there is probably about 600BF (by my calculation) of blanks, slabs, cants, etc...

Here's my question....I don't need nor have I room for this much turning stock. There was 2 skids of chunks, both skids combined probably 10-11'L x 42"w and the chunks were piled probably 2-3 feet high. He is making this available at a real steal of a price, but I'm pretty busy right now to do much prep to sell work on this stuff and am curious to know if there is anyone who may have an interest in partnering with me on the purchase of this.

I think this is a steal...like I said, this is his personal stash and he has the pick of the best stuff that comes out of his high end veneer mill. I just want to know if there is anyone out there interested in going in on some of this??

Because I didn't have my camera with me, I didn't get any pictures of the stuff, but I did grab a piece that I plan to clean up and get a picture of.

Let me know. If there is enough interest, I'll claim the stuff and put it on the classifieds and give a portion of the sales to Ellis Island.

Thanks for any replies.

Kurt

Re: Gonna float this to see interest....

#2

Here's picture of some of the claro

KurtK in Indy

>This is pretty representative of the figure in this stockpile.


img

Re: Gonna float this to see interest....

#3

another... 

KurtK in Indy

>


img

Re: Gonna float this to see interest....

#4

JL

Re: Very interested ..

JL

>depending on the price of course. Make some mighty nice table tops (okay, turnings also).

Re: Gonna float this to see interest....

#5

Re: Very interested ..

Bernie

>Always looking for platter stock

Bernie

send me an email at above address

Re: Gonna float this to see interest....

#6

Re: Gonna float this to see interest....

Sue McLam in Orange, VT

>Kurt,

I'd get some for platters, bottle stoppers, pens. And if there's any 3x3 maybe some salt and pepper grinder stock as well.

Sue

Re: Gonna float this to see interest....

#7

Re: Gonna float this to see interest....

Jorge Castaneda

>Platter stock, email me, thanks

Jorge

Re: Gonna float this to see interest....

#8

Re: Gonna float this to see interest.... (

Terry Quiram, Roanoke Illinois

>Kurt

I am interested in platter and bowl stock.

Terry

Re: Gonna float this to see interest....

#9

I'd be interested...

Larry In Lima

>I'd be interested in pieces that would fit on a Jet Mini, at a good price that you are talking about. A variety of sizes would be great... Larry

Re: Gonna float this to see interest....

#10

Re: Gonna float this to see interest....

Gil Mitchell

>kurt are you looking for someone to split this walnut like half and half ( that's the way I read your post } if so you can e-mail me with details I would be interested. Gll

Re: Gonna float this to see interest....

#11

Re: Gonna float this to see interest....

Sam Dean

>Hi Kurt,

I'm interested. I'm about 50 miles south of you.

Thanks,

Sam

Re: Gonna float this to see interest....

#12

When are you gonna be in town??

KurtK in Indy

>Hi Terry:

When do you plan to be in town next?? Based on the interest here, and as soon as some of you guys see the stock, I'm sure I won't have a problem getting buyers for it.

I am going to go ahead and get the walnut. It has some really great pieces. I saw a couple that were really spectacular. There was one piece that looked large enough to make a mantel piece out of. I will be picking up the lot next week and I would probably guess that you could come up and take a look and pick out whatever you want.

I hadn't really planned to make any money out of it, really just wanted to get some of the walnut and make the rest available to my friends on WC. It looks like there is a lot of interest and I suppose I'd be willing to divvy up a certain amount as long as it didn't get too out of hand. I'd like to sell large enough lots that I would only have to send out (or have someone pick up) a handful.

Let me know.

Kurt

Re: Gonna float this to see interest....

#13

Not sure about half/half, but...

KurtK in Indy

>Hi Gil:

Based on the interest, I don't think I'll split it half & half, but will make the stock available in whatever size lots people want. I don't want to sell onesie twosie though. I would like to break this up into maybe a dozen or so lots and sell them that way. Looks like the going rate for regular grained walnut would be around $4-5/bf and highly figured would I'm sure be significantly higher. I have a feeling I'll be able to keep it around $4/bf...depending on exactly how much footage I get. I know what he wants for it and I have an idea of how many board feet there are, but guesstimating and getting actual bf will let me know if I can sell this for a great deal or not. I'm confident that the price will be a bargain.

Again, I did see a couple of the pieces and the grain was spectacular.

I'll be putting a list together of what is there and will make that available to interested parties.

Thanks,

Kurt