Longworth
Vicmarc.fan
>I made this from directions in Woodturning Design.
Ron
Knowledge You Can Build On — Est. 1998
Longworth
Vicmarc.fan
>I made this from directions in Woodturning Design.
Ron
The lathe?
John Lucas
>Wow you built the lathe and the workshop. I'm impressed. :)
Re: The lathe?
Vicmarc.fan
>Cute John. The title was Longworth not lathe.
Ron
Re: Longworth
John Morovich
>Very nice. I'm thinking about building one, any trouble routing the arcs , I assumed you did it freehand.
Re: Longworth
Jorge Castaneda
>John,
no free hand, you pivot the router and pierce both layers simultaneously.
$0.02
Jorge
Re: Longworth
jared
>remove 1 for email
I just got done making the same chuck and I posted a picture of it a couple of days ago on this forum. I made a plywood base for my router that let me cut an arc that was about a ten inch radius. It was easy to make after I thought about it a little. You definitely need a jig like that to rout the arcs as they all have to be the same radius and shape or the two halves of the chuck wont rotate against each other to vary the size. The directions in woodturning design are well written and easy to follow. Jared