Oneway Chuck Jaws & Easycore specs *LINK*
e
>hopefully, the link to the spreadsheet will work ... it includes all the Oneway jaw dimensions (internal/external). ...
Oneway jaws dimensions
Knowledge You Can Build On — Est. 1998
Oneway Chuck Jaws & Easycore specs *LINK*
e
>hopefully, the link to the spreadsheet will work ... it includes all the Oneway jaw dimensions (internal/external). ...
Oneway jaws dimensions
Re: Oneway Chuck Jaws & Easycore specs
don lewonczyk
>Thanks alot, I have both and can't remember what drawer it's in or stack of papers. I'll put this on a piece of plywood between the floor joists,hinge the top, string on the bottom,a pulley a few inches away so I can lower it to see the specs then raise it back up out of the way right above my lathe, COOL. I hang some of my lites the same way,I can adjust or fine tune the lighting to see better what I'm trying to do. DonL
Re: Oneway Chuck Jaws & Easycore specs
Dennis Daudelin
>This is an incredibly useful document!! I'm always trying to remember the numbers or find the boxes from the jaws to see the dimensions!! Thank you for taking the time to put it together and sharing it with us!!!
Dennis
Re: Oneway Chuck Jaws & Easycore specs
George Van in WI
>Thanks for posting this, it goes on the shop wall tomorrow!