Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

question for desert turners of mesquite

Posts

question for desert turners of mesquite

#1

question for desert turners of mesquite

ken chase

>Thought it would be fun to work on a mesquite root that a neighbor had removed from his yard. Put a new chain on my chainsaw and could not cut this darn thing. Is the root much harder than the rest of the tree?

Should I give up?

Thanks

Re: question for desert turners of mesquite

#2

Re: Mesquite root shouldn't

Allen Neighbors

>be that much harder than the tree itself. I've cut a bunch of Mesquite. When trying to cut the roots of a tree, it's always best to wash the dirt away with strong spray of water, and allow to air dry before cutting. Did you remove all the dirt? That will dull a chain quicker than cutting a piece of iron. The only other thing I can think of is maybe the tree root grew around something metal, or a rock.

Hope this helps.

Allen

Re: question for desert turners of mesquite

#3

Dick Hines

Re: Mesquite root shouldn't

Dick Hines

>I am not beenin a wise a.. ken but you put your chain on so it is in the right direction? I have seen it done. It's easy to do when you get rushed.

Re: question for desert turners of mesquite

#4

chain saw

tek-Brunswick, Ohio

>It sure runs smooth with the chain on in the wrong direction, but it doesn't cut worth a D##n. It happened to a, erh, a, ummm, a friend. Yeah a friend. I won't even go into what happens if you put the oil and the gas in the wrong tanks. No, it doesn't pay to hurry with a chainsaw.

Tom

Re: question for desert turners of mesquite

#5

Re: Mesquite root shouldn't

Roger

>My neighbor tried to saw with a chain on backwards and unsawed a half cord of firewood before he realized what was wrong:)

Re: question for desert turners of mesquite

#6

Re:This thread is starting to.....

JamieDonaldson

>.... sound like the story about correcting that last bad cut and putting the wood back on by running the lathe in reverse!

Re: question for desert turners of mesquite

#7

Re:This thread is starting to.....

RussFairfield

>.... or about the guy who cut 3 cords of wood before somebody showed him what the starter cord was for.

Re: question for desert turners of mesquite

#8

Re:This thread is starting to.....

Roger

>Or the fellow whose tractor got stuck in reverse and before he could get it stopped he had unplowed three acres.

Re: question for desert turners of mesquite

#9

Re:Thanks. Enjoyed your comments

ken chase

>