Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Bill Grumbine's Spalted Maple

Posts

Bill Grumbine's Spalted Maple

#1

Bill Grumbine's Spalted Maple

Carole Valentine

>Bill sent me two 4"x4"x2" blocks of pretty Spalted Maple. Turned this today from one of them. It is 3.75" x 1.5" with a Blackwood collar. It weighs 1.5 oz. I'm feel like I am improving in the area of wall thickness and consistency with each new piece I do, and that is exciting! This piece has no finish yet. I am debating about leaving it natural and just buffing it. Comments, positive and negative are welcome.


img

Re: Bill Grumbine's Spalted Maple

#2

Oh! Thanks, Bill!

Carole Valentine

>

Re: Bill Grumbine's Spalted Maple

#3

Re: Bill Grumbine's Spalted Maple

Allen Neighbors

>Carole, as usual, this turning is awesome, too!! Bill done good... you done better.

When I see you at TD's I'm going to ask you to explain how you turn something so small as those collars... I'm stumped. Be prepared. :o)

Allen

Re: Bill Grumbine's Spalted Maple

#4

Very nice, Carol!

Eddie Pacheco, San Jose, Ca.

>The two lighter regions look like land masses with the the darker region being water and the "Strait of Valentine" in full view.

Re: Bill Grumbine's Spalted Maple

#5

Re: Bill Grumbine's Spalted Maple

Carole Valentine

>Allen, it's pretty easy. And a small collar is no more difficult than a large one. I may do it differently from other folks. I grab the square stick of whatever in the chuck, drill a hole the depth of the collar and tenon, shape the collar, cut a shallow tenon to fit the opening and then just part it off. Very little waste and no fooling with a face plate and tape until I get to the last one to be made from that stick of wood. When you are using Blackwood or Ebony, no sanding is necessary except maybe at the edges of the hole.

Re: Bill Grumbine's Spalted Maple

#6

Re: Bill Grumbine's Spalted Maple

Ron in Drums PA

>Wonderful Carole, Really Wonderful!

Re: Bill Grumbine's Spalted Maple

#7

Re: Bill Grumbine's Spalted Maple

John Laseter

>Hi Caroel,

BEAUTIFUL!! I can't make up my mind which I like better, this one, or the buckeye posted below. If you are willing to part with either one, let me know how much. Thanks for posting. Regards.

Re: Bill Grumbine's Spalted Maple

#8

Re: Bill Grumbine's Spalted Maple

Bill Grumbine (Kutztown PA)

>Very nice Carole! I see a rhino chasing a horse. ;-)

Bill

Re: Bill Grumbine's Spalted Maple

#9

Same Here Eddie

Jim Shaver - Oakville, Ontario

>Hi,

I was "seeing" some type of continental drift....plate tectonics...:-)

Carole.....have you been told yet...Keep it Going!!

This one is really nice!

Take care,

Jim

Re: Bill Grumbine's Spalted Maple

#10

Re: Thanks, Carole

Allen Neighbors

>I appreciate the instruction. When you explained it, I really felt dense. :o) I now have "Collars by Carole" entered into my instructional helps notebook.

I've got a small chunk of cocobolo ready to mount tomorrow, and lacking the ebony or blackwood, I've got to come up with something that will do for the collar. Maybe black walnut...? or Ash? or Peach Burl? I'll find something that contrasts without clashing.

Allen

Re: Bill Grumbine's Spalted Maple

#11

Natural!

Ed Kelle

>Yes I love the natural look. And call me crazy, but I see Santa with his hat pulled over his eyes on the left side.

Carole, are you using a mini hollower? did you make it? I'm still using my Sorby but it would never fit in such a small piece.

This is so light weight, jeez, you are really getting good at this. I'm jealous

Ya really don't need that big DVR to do these, how about sending it to me? haha

Re: Bill Grumbine's Spalted Maple

#12

Re: Natural!

Carole Valentine

>Hi Ed,

I just used my Kelton 3/8" hollowers on this piece. It was large enough to use them. I do have some tools I made to make minis with.

Re: Bill Grumbine's Spalted Maple

#13

Re: Bill Grumbine's Spalted Maple

Molly Winton

>Dang girl! You're just rockin' and rollin' with all this wood. I'd say we all made a great investment when we sent it all to you. These are all top notch!!

Re: Bill Grumbine's Spalted Maple

#14

Re: Bill Grumbine's Spalted Maple

George Van in WI

>I don't know how you do it Carol, you're turning things out quicker than the Chinese, the difference is you are producing quality form and finish in each piece. Keep them coming, I am enjoying the �Show�!