Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Credit Card Processor's for Craft shows *LINK*

Posts

Credit Card Processor's for Craft shows *LINK*

#1

Credit Card Processor's for Craft shows *LINK*

Devon Palmer

>Hiyas all,

Kinda OT, but, I wanted to see if anyone had experience with taking credit cards for art and craft show sales. Can you reccomend (or warn as the case may be) one credit card processor over another?

Warmest Regards,

- Devon Palmer, Columbus Ohio


http://www.devonpalmer.com

Re: Credit Card Processor's for Craft shows *LINK*

#2

Re: Credit Card Processor's for Craft shows

Gary Evans Tallassee, TN

>Hi Devon,

I sell woodturning wood at 4 to 6 symposiums a year. I am using Paypal's Virtual Terminal. I have to take down all the card info and post the transactions after the show, but that hasn't been an issue so far. Cost per transaction works out to, I think, 3.5% plus a $20 per month fee. I couldn't find a local vendor for the processing service. Banks don't want to fool with small companies and few transactions per month.

Since I was already using Paypal for some transactions, it just made it simple to go with them.

Gary Evans

Talasi Hardwoods

Re: Credit Card Processor's for Craft shows *LINK*

#3

Re: Credit Card Processor's for Craft shows *LINK*

Jim Eddy

>Check out TeaMac. Guy MacDonald has a lot of experience working with craftspeople and is well regarded in the art/craft community. I have the simplest setup--I just dial in a charge on my cell phone.


TeaMac, Inc.

Re: Credit Card Processor's for Craft shows *LINK*

#4

Re: Credit Card Processor's for Craft shows

Bill Grumbine (Kutztown PA)

>Hi Devon

I got my merchant's account way back in 1995 when most people laughed about taking cards over that new thing called the internet. I cannot give you any real specific information beyond shop around. The very same machine can cost anywhere from $300 to $1500, depending on the vendor, and discount rates can vary widely. Do ALL the math before you plunk down your money. I looked high and low and found the best deal at the last place I would have expected, my own bank where I had my business account.

As far as doing the shows themselves goes, I found that my sales went up significantly once I started taking cards. Some people grumble about the cut the bank takes, but it is a cost of doing business. Some of a sale is better than all of no sale. We call in via a cell phone for authorization and then finalize the sale after the show. That way we make sure the card is good without holding up the customer any longer than necessary.

Good luck with it.

Bill

Re: Credit Card Processor's for Craft shows *LINK*

#5

Dick Hines

Re: Credit Card Processor's for Craft shows

Dick Hines

>I have been doing shows for about 4 years. I don't take credit cards and I can count on one hand the sales I have lost because of it. I do out door shows and some times there is a proublem getting a connection with the wireless readers.

I will take a check and of course cash.

Re: Credit Card Processor's for Craft shows *LINK*

#6

Re: Devon- plastic is good!

JamieDonaldson

>I have been using mymerchantview.com recently, and Term Net Merchant Services is another good source for reliable service. My wife is actually the authority here- I work for her since she keeps the books! We have been taking plastic money for more than 30 yrs. with my photo business(recently retired) and craft shows, and sales will definitely increase when real money isn't needed! We use a wireless terminal on location for instant approval and deposit. And don't overlook the possible service from your local bank as Bill suggested.

Re: Credit Card Processor's for Craft shows *LINK*

#7

Re: Credit Card Processor's for Craft shows

Robert Savit

>The best deal I've found a merchant account with NOVA through Costco. You need to be a member of Costco. The great appeal of this account is that it is seasonal--i.e. you can shut it down for periods of time and avoid paying the $20/month service fee. I usually activate it for 2 months in the summer and 2 months around xmas.

Bob Savit

Re: Credit Card Processor's for Craft shows *LINK*

#8

Don't be so sure...

Peter Teubel

>Its the ones who DON'T ask that can be the sales you lost. If don't have a VISA/MC sign in your booth, some folks will simply look and not inquire. Accepting plastic also allow folks to buy on impulse rather than reflection.

Re: Credit Card Processor's for Craft shows *LINK*

#9

Re: Credit Card Processor's for Craft shows

Peter Teubel

>I use Propay.com. Its not real-time (swip the card with a knuckle-buster and enter it online after the show), but it works for me.

Re: Credit Card Processor's for Craft shows *LINK*

#10

Thanks!

Devon Palmer

>Great! Thanks all for the great feedback, gives me some good directions to investigate.

Re: Credit Card Processor's for Craft shows *LINK*

#11

Re: Credit Card Processor's for Craft shows

Chuck McKinley

>Sam's club also offers credit card processing for members.

Re: Credit Card Processor's for Craft shows *LINK*

#12

Re: Credit Card Processor's for Craft shows

Bill Hale

>I too have an old knuckle buster and post after the show. Over 1/2 of my sales are plastic. Post the signs and they just hand you the card and a bowl.

We have an old terminal that we hook to a telephone and do the posting.

Talk to your bank for what you need and I think you will find it realy cheap. We pay no monthly and just a percent or two per transaction.

We have never had a loss in 4 years, a couple took a couple of weeks to get through but you can just keep trying.

Good luck Bill in Casa Grande, AZ.