Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Amity Model 1000 HVLP unit?

Posts

Amity Model 1000 HVLP unit?

#1

Amity Model 1000 HVLP unit?

Dominic Greco in Richboro, PA

>Hi everyone,

A friend here at work has an almost brand new Amity Model 1000 HVLP unit for sale. The old Amity catalog he lent me lists the retail as $725, but he's willing to part with it for $250. I know the guy and have a good feeling as to the condition of this tool. Using Yahoo, (and being pressed for time) I was unable to find a link to Amity's web site.

The literature reads:

"Our most popular turbine. This unit has all the power you need to spray Amity water-based finishes (and lighter lacquers). The model 100 is enclosed in a small case that is easy to carry, and small enough to sit on a shelf in your shop. Can be used with the quart cup that is included, or connected to our 2 quart remote cup, or a 2.5 gallon pressure pot/fluid system. Outperforms competitive turbines selling for hundreds more. Includes Series II Professional Spray Gun, Quart Cup Assembly, and 20' Air Hose".

My idea is to use this to spray thinned furniture grade lacquer on vases, bowls, and furniture. But I wouldn't mind trying out water based lacquer at some time.

Do you think it's worth $250?

Thanks in advance,

Dominic

Re: Amity Model 1000 HVLP unit?

#2

Re: Amity Model 1000 HVLP unit?

don lewonczyk

>Hi, don't know about that brand of HVLP but it depends on the number of turbines it has as to good a finish you'll end up with. I have a 3 turbine graco system but the trouble to drag it out and than clean it afterwards,a spray can would be more useful and a lot cheaper and clean up is a breeze. Turn the can upside down and press nozzle till only air is coming out and your done. Unless your going to do production runs, I'd spend the money on something more useful(my thinking of course)but for as much use I've gotten out of mine a tool that cuts, grinds, carves or burns would be my personal choice. If your a cabinet builder buy the spray system,you woun't go wrong in that case. Hope it helps,DonL Prospect,TN>