Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Priceless!

Posts

Priceless!

#1

Priceless!

William Duffield, on the Cohansey

>Some photos of spindle turnings. These are recently created tools from the Loxahatchee Toolworks, whose design, materials and techniques were strongly dependent on the friendship, help and cooperation of WoodCentral friends.


From top to bottom:

The burnisher is from bocote, a brass compression nut, and a recycled carbide high pressure water cutting tool nozzle. The donor of the carbide must remain unnamed.

I finished this carving mallet last night, from a piece of Eastern Hophornbeam, Ostrya virginiana. This is also known as ironwood, for very good reason. My appreciation to Greg B�tit for rescuing this from a firewood pile. If it's tough enough for L-N bench chisel handles, it should hold up to bashing on chisel handles. It's 3" in diameter, and blanks in this size (without pith) are very difficult to find, anywhere.

Two horsehair brushes, the larger from bocote, for cleaning plane mouths. The smaller is made from white oak. It's short bristles are stiffer, making it useful for cleaning rasps. The bristles of both of these are set in epoxy.


Another horsehair bench brush, longer bristles also useful for cleaning keyboard, etc. It is set with yellow carpenters glue into a mahogany handle. Thanks to John B Aniano, Bowmaker, for recycling the offcuts of $400 per lb. bow string material for all three brushes, instead of just tossing it in the trash.

Re: Priceless!

#2

Re: Priceless!

Rob Lee

>Hi William -

Your recycling of horsehair reminded me of a trade show I went to a few years ago, in China...

I stopped at one booth which specialized in fibres and various natural hairs and bristles. Instead of the coarser pig bristles, I was looking for something like badger hair for finishes...

I picked up one brush which was a wonderful soft white fibre. Asked the guy at the booth what it was, and with his pretty rough English (infinitely better than my Chinese) he explained that it was Goat hair from Chinese goats....

I picked up a dark brush beside it that was a bit coarser - and asked him what that was... and he just said Chinese...

Yes I said, but what animal? Ah he said - no animal... just Chinese... it's people hair....

Now that's a tough product to sell.

Cheers -

Rob

Re: Priceless!

#3

Way, way nicer than anything from the store.

Eddie Pacheco, San Jose, Ca.

>

Re: Priceless!

#4

Re: Priceless!

Bill Grumbine (Kutztown PA)

>Very nice William! I wonder if your source for the nozzle is the same as mine was.

Bill

Re: Priceless!

#5

Re: Priceless!

William Duffield, on the Cohansey

>The larger nozzles were used in the automotive industry. Specifically, they were supplied by Andy Lincoln at the Ulitmate Burnisher. As you may remember, I met him in person for the first time at one of your picnics. The smaller nozzles are scrap from the aerospace industry.

Re: Priceless!

#6

Re: Priceless!

Bill Grumbine (Kutztown PA)

>Thanks William. I got mine from Andy at the picnic.

Bill