We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I turned a couple of small goblets this week from green hedge. Turned and sanded complete and coated with minwax tungoil. Now I know how hedge posts will crack as they dry but am hoping the thin sections with finish apply might make it. Any one with experience with this wood?
I've turned a fair amount of OO. If you turned it reasonably thin it shouldn't crack. OO in my experience distorts less when turned green than almost anything I've turned. One of my favorite woods.
I have turned a fair amount. I'd turn more, but it is a little hard to come by out here in Oregon. The green stuff that I have turned has been stable after turned to an even thickness. I turn mostly bowls, but have some cracked stuff that will make good hollow forms. I have had no problems with cracking after turning.I just put it on a shelf and let it sit until dry, then sand and finish. I don't bag it or anything, but our climate is mild and humid.I wish it would keep the bright orange color, but it goes amber as it ages. It still keeps the luster.
>You must be up North. Down here we call it Bois D'Arc (promounced bodark). I've turned a fair amount of it. A goblet with an 1/8" thickness and without the pith should be fine.
It's a lot more fun after it's aged 3 or 4 years :>)
>Sitting a piece in a window, and turning it a different direction every day will age it quicker. As will just sitting it under a lighted lamp every evening. Just make sure to rotate it occasionally, to keep the aging even. I used to set a piece on my rock bridge, in the sunlight, all day, and then turn it 180 degrees for another day. If the sunlight is too hot, it can cause more movement, quicker, and may even cause uneven thicknesses (as in bandsaw boxes) to crack, so be careful.
>Phil,we call it Hedge Apple here in the "Real South" :) I assume your down there with Clay Foster, say hi if you see him.
I've got 2 pieces I've got to turn one of these days soon. It makes great thin vessels because it's a very tough wood but they do warp. Not terribly. I've never left the pith in so I can't answer whether you'll have problems with that or not.
It's also one of the few american woods that will take hand chased threads.
>... collected all the names that Osage is known by. Monkey ball, bodark, bowwood, hedge,etc.... Grows like a weed around here, and one of my favorite turning woods, and if it cracks its great firewood.
>Rick, I'm cutting a Bois d'Arc tree down in May. It's three trunks of about 18" in diameter, and about 40 feet tall. Just have to wait until May, due to my recovery time from a heart attack, and the man who owns it will help me, during his May vacation.
I'm going to be sawing and sealing blanks like crazy for a while, but I'll share. Maybe we can get into a wood exchange???
>I understand that part of the puzzle, Jamie, but one's gotta strike while the iron's hot. The owner wants it down, the sooner the better. He has moved some horses into the pen where the tree is located. And he has to throw those horse apples over the fence all the time, to keep them from his horses.