Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Banded Cherry Bowl

Posts

Banded Cherry Bowl

#1

Banded Cherry Bowl

Jennifer@Indy.USA

>Hi gang,

Here's something I've been playing around with. I'm very tentative with my carver as you can see here. There's very little material removed....but I'm having fun with it. The bowl is cherry and the pegs are walnut. The peg holes were a real drag to chisel out and keep consistent. I desperatly need to make a carving stand to hold my chuck at the bench for stuff like this. I Learned a lot and had fun too. I used a thin burning pen to try to down play some of the poor chiseling for the pegs. Not sure if it helped or hurt. I was envisioning an Arts & Crafts look. Not sure if I pulled it off or not? I wish I had some different angles of this....the banding looks a lot better and more 3-D from a birds eye view.



This one is aobut 7" diameter. Tried a new finish. Sam Maloof Oil and Wax finish...wipe on from a can. Anyway...let me know what you think.

Thanks for looking,

Jennifer

Re: Banded Cherry Bowl

#2

Re: Banded Cherry Bowl

Carole Valentine

>Sure looks good to me Jennifer. The area where you removed wood appears to be flawlessly blended...a feat that I am not sure I could ever accomplish. I don't mind the chisel marks on the inserts. They add a little "earthiness" to the piece. I expect we will be seeing some great stuff from that carver in the future!

Re: Banded Cherry Bowl

#3

Re: Banded Cherry Bowl

Andy_B

>Looks cool to me Jenn. If I had tried that there would be blood all over the bowl.

Re: Banded Cherry Bowl

#4

Re: Banded Cherry Bowl

georgetroy

>Keep them coming Jen. Looks good to me. Glad to see you reaching out. Keep it up. GT

Re: Banded Cherry Bowl

#5

Re: Banded Cherry Bowl

Eddie Pacheco, San Jose, Ca.

>Looks like a nice looking first prototype to me. Now is there 3 of these bands with inserts? I agree with Carol on the inserts. I was thinking maybe on the next ones you can try 2 or 3 different sized (width) bands each with an insert and a carved corresponding groove on the bowl edge to really create a banding look.

Hey, it's easy to Monday morning quarterback anything!

Really, I think you came up with a pretty neat idea for a bowl feature.

Re: Banded Cherry Bowl

#6

Band in Broad Ripple?

You are quite welcome my friend.

>

Re: Banded Cherry Bowl

#7

Re: Banded Cherry Bowl

Jim Shaver - Oakville, Ontario

>Hi Jen,

Now that is Different! Wow I like that a lot....I use walnut square pins and accents now alot in my A&C furniture, what a great idea to bring the design to turning.

The cherry will age wondefully with the walnut...and I see so much potential for new designs from this...You Go Girl!!

Take care,

Jim

Re: Banded Cherry Bowl

#8

Re: Banded Cherry Bowl

Jennifer@Indy.USA

>Thanks Jim :)

Re: Banded Cherry Bowl

#9

Thanks Everybody :)

Jennifer@Indy.USA

>

Re: Banded Cherry Bowl

#10

Re: Banded Cherry Bowl

Ed Kelle

>Nice work Jen. I like the style. I've used Maloof on lots of pieces, but they were all furniture so far. Builds up a nice sheen in a few coats. Did you get the Oil/wax to use after?

I"m actually looking to try some of your Gel wipe on poly, once I can find some. Only seen it mailorder around here. Let me know which you think works better.

Keep up the good work

:)

Re: Banded Cherry Bowl

#11

Nice

Barbara Gill, Remlik VA

>

Re: Banded Cherry Bowl

#12

Re: Banded Cherry Bowl

Jennifer@Indy.USA

>Thank you Ed :)

Actually.....I only bought the oil/wax Maloof stuff. Was I suppose to put something else on first? Lovely :)

The poly I use is the Rockler brand. I did like the Maloof stuff. I think it must have some boiled linssed oil in it. At least that's what it smells like. Seemed to go on real easy and may have given a nicer sheen. The Rockler poly is a satin poly. That's the only way it comes. I'm sure you could buff it up and get it to sheen more though.

Thanks agian,

Jen

Re: Banded Cherry Bowl

#13

Re: Banded Cherry Bowl

Ed Kelle

>I've used his Oil/Poly first for 2-3 coats followed by the Oil/Wax. I do like the smell of the Oil/Wax. They work really nicely on Walnut and don't darken/yellow maple too much at all. have fun!

Re: Banded Cherry Bowl

#14

Re: Banded Cherry Bowl

Dale Sherman, Manlius, NY

>Lovely work, Jennifer! I really like where you're going with your Arts and Crafts design exploration. the contrast looks great, and the beveled pegs compliment the bowl well. I think the woodburning around the peg actually made them look too large. The illusion of fastened banding is very nice, lots of variations to explore there.

I sent you an email with some ideas to explore, just a couple of thoughts to stick under your bonnet.

Keep it coming, we love watching you reach out with your creativity.

Dale

Re: Banded Cherry Bowl

#15

Re: Banded Cherry Bowl

Jennifer@Indy.USA

>Thank you Dale for your kind comments,

You must have sent the email to my work address....I don't see it here at home.

I'll check when I get there in a little while.

Jen

Re: Banded Cherry Bowl

#16

Re: Banded Cherry Bowl

Bob Elliott

>Hey Jennifer,

The banding is a real nice touch!

Did you get your speed controller hooked up to the carver yet?

Re: Banded Cherry Bowl

#17

Re: Banded Cherry Bowl

Jennifer@Indy.USA

>Thanks Bob :)

No the controller hasn't arrived yet. I thought it might be here on Friday, but looks like it will be this week sometime.

Jen

Re: Banded Cherry Bowl

#18

Re: Banded Cherry Bowl

Ed Karch

>Great design idea and well done.

Re: Banded Cherry Bowl

#19

Re: Banded Cherry Bowl

Pete in Holland, MI

>Have a drill press? How bout investigating a mortising attachment ($50 or so). They drill really nice square holes. Probably have to drill the holes between rough and finish turning.