Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

tool blanks

Posts

tool blanks

#1

tool blanks

Dave Langas

>Can anyone steer me to a site where I can purchase either square or round HSS tool bit blanks at least 8 inches long that I can use to attempt in making some of my own tools? Thanks for any help.

Dave

Re: tool blanks

#2

Re: 2 sources are:

Al Crandall (NE of Indy)

>For square, try http://www.wttool.com/c/22180005p

For round, try http://www.use-enco.com/CGI/INSRIT?PMAKA=383-7015&PMPXNO=941073&PARTPG=INLMK3

Re: tool blanks

#3

Dick Hines

Re: tool blanks

Dick Hines

>Try Dixie Industrial Supply.

www.dixiesupply.com

1-800-255-0776

Re: tool blanks

#4

Re: mscdirect.com

Lan Brady

>

Re: tool blanks

#5

Where for wide HSS bar stock, 6+" long?

Craig Daymon

>I'm interested in this as well. I know I can get all the way up to A11 (used in Glaser tools) or M4 (used in Crown Pro-PM tools) HSS from McMaster-Carr and MSC Direct in round stock in lengths up to about 6 feet, but I can't find anyone selling bar stock even 6" long and even an inch wide. I'd like a foot or more of 3/8" thick HSS (M2 is fine) about 1.5" wide. (Saw John Jordan using his shear scraper this weekend and I want to make one.)

-Craig

P.S. McMaster-Carr is at: http://www.mcmaster.com and MSC Direct is at: http://www.mscdirect.com

Re: tool blanks

#6

Re: Where for wide HSS bar stock, 6+" long?

Colin Spencer

>Craig, If you can't find anyone in the US with what you want Ashley Iles in the UK will supply any of their bar stock they are at http://turningtools.co.uk/ashleyiles/index.html When I wanted some a quick phone call and credit card number and I had the stock in 48 hours.

Re: tool blanks

#7

Re: Where for wide HSS bar stock, 6+" long?

Lan Brady

>At mscdirect.com look at "tool bits" . They have round, square or rectangular profile.

Lan

Re: tool blanks

#8

Re: Where for wide HSS bar stock, 6+" long?

Dave L

>Thanks for all the info. Found 1/4 by 8 in long on a couple of the sites. Haven't been able to find anything bigger than 1/4 that is 8 in long though. I will keep looking. Thanks again.

DAve

Re: tool blanks

#9

Re: Where for wide HSS bar stock, 6+" long?

Phil Joines Krum, Texas

>The larger sizes are probably anealed. HSS isn't the kind of thing most people can heat treat at home. They need to be kept at about 1400 degrees F for several hours.