Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Bandsaw tooth count / size for cutting bowl blanks

Posts

Bandsaw tooth count / size for cutting bowl blanks

#1

Bandsaw tooth count / size for cutting bowl blanks

Shane Ferrell

>I am a new wood turner and want to know what the best combination for bandsaw blades is for cutting green bowl blanks. 6-12" arround, 2-8" thick, you know the free stuff you haul home from trees.

I had poor luck with a 1/2" x 4 hook, but it may have been dull to start with. 3/4" was too wide for some of the circles. I had better luck with 1/4" x 6 when it was brand new, but dulled quickly and is dangerous now. I am going to try 3/8" x 3 hook, but would like to know what others use as well.

Also what do you clean the pitch off the BS blade with?

Re: Bandsaw tooth count / size for cutting bowl blanks

#2

JL

Re: Bandsaw tooth count / size for cutting bowl bl

JL

>3/8" or 1/4", 3 TPI for me. As for cleaning pitch/sap - Simple Green works somewhat (and the gallon jug is cheaper than the "pitch cleaner" sold at the various woodworking stores). Besides, we use the Simple Green for other cleaning chores :).

Re: Bandsaw tooth count / size for cutting bowl blanks

#3

Re: Bandsaw tooth count / size for cutting bowl bl

Peter Teubel

>I use 3/8" 4tpi hook blades exclusively for cutting bowl blanks.

Re: Bandsaw tooth count / size for cutting bowl blanks

#4

Re: Bandsaw tooth count / size for cutting bowl bl

Ruth Niles

>Shane,

Like Pete, I've used the 4 tpi in either the 3/8" or 1/4" exclusively for cutting bowl blanks. I use the Timberwolf blades. I tried the 3 tpi, they are simply too aggressive for me. I can't get the wood (log) perfectly flat on one side and the 3 tpi blade grabbed, rocked, rattled and rolled the wood a bit too much.

For the size wood you're cutting, the thinner 4 tpi would work just dandy.

Re: Bandsaw tooth count / size for cutting bowl blanks

#5

Re: Bandsaw tooth count / size for cutting bowl bl

Jeff Taylor

>Currently, I cut all kinds of wood on my bandsaw, and am mostly happy with the results. I have a variety of blades in a variety of TPI / widths / etc ... Here is my question ... Am I missing something, by not sharpening my own bandsaw blades, or should I continue to "collect" blades that no longer cut quite as nice as new. I *will* try the "Simple Green" cleaning idea, but I think the blades are getting dull too quickly (at least for my taste), perhaps after only a dozen-and-a-half 'uses'. Maybe it is not worth the time and energy to touch-up the teeth on a Dremel or a diamond stone.

Follow Up Thought :

Would I be risking my life and eyesight if I ground-off a tooth or two from a wide blad to make it a "One or two teeth per inch" instead of three or four ... just a thought ....

thanks .... this place is such a great resource for ideas ... I am going to have to upload a pic or three soon ...

Re: Bandsaw tooth count / size for cutting bowl blanks

#6

Re: Bandsaw tooth count / size for cutting bowl bl

bob davis

>touch up teeth on your blade with dremel..willcut like new

Re: Bandsaw tooth count / size for cutting bowl blanks

#7

Keith Tompkins

Re: Bandsaw tooth count / size for cutting bowl bl

Keith Tompkins

>I generally use a 3?8" skip tooth blade.

Re: Bandsaw tooth count / size for cutting bowl blanks

#8

Re: Bandsaw tooth count / size for cutting bowl bl

dick gerard

>Has anyone ver tried carbide tip blades? Yes they are more expensive but defintely worth the price. I used one for over 10 years and never lost a tooth and the blade was so sharp it was scary. It was 3/8 3 tooth hook as I remember. Used it on some big stuff too, like 10 and 12 inches thick. As an alternative, i highly recommend the blades that come from ... ummm is it Wolverine or Timber Wolf? Got one on the BS now and it cuts like a dream. But i know it won't last as long as the carbide tipped blade.

Re: Bandsaw tooth count / size for cutting bowl blanks

#9

Re: Bandsaw tooth count / size for cutting bowl bl

Shane Ferrell

>Thanks for all the advice. I will get some 3/8 tomorrow.

Re: Bandsaw tooth count / size for cutting bowl blanks

#10

Re: Bandsaw tooth count / size for cutting bowl bl

Terry Quiram, Roanoke Illinois

>Shane

You really don't need to get the blanks round, just cutting off the corners will work.

Terry

Re: Bandsaw tooth count / size for cutting bowl blanks

#11

One other factor in the equation

Gary Evans Tallassee, TN

>Hi Shane,

The type of blade which will work best on your saw depends a good deal upon what size motor you are running. I have cut a bunch of blanks from 2" to 5" thick on a 12" Craftsman bandsaw with a 1/2 HP motor. I used a 1/4" blade. That little motor wouldn't spin any bigger blade through the thick stuff. My recommendation is to use the narrowest blade you can for the size of your saw. I'm currently using a 1/4" 4 TPI Hook blade on my Delta 14" with riser and 1.5 HP motor because it was available at the local WoodCraft. I want to try the 3/8" and see what it will do.

Gary

Re: Bandsaw tooth count / size for cutting bowl blanks

#12

Re: Bandsaw tooth count / size for cutting bowl bl

Doug

>I was always going thru blades way faster than I thought one should. I went to a Lenox Promaster 11 M-42 HSS Bi-Metal at 1/4" 6 tpi hook tooth (about $35.00). What a joy - cuts bowl blanks like butter. I have a 14" Delta with riser block.

Re: Bandsaw tooth count / size for cutting bowl blanks

#13

Re: Bandsaw tooth count / size for cutting bowl bl

robo hippy

>I am lucky to have a Lennox dealer here in town, who will make whatever blade I need. When I told him what I do, he said that the only reason to use a carbide blade was for resawing veneers. For bowl blanks. he said to use bimetal blades. On my small saw, a 1/2 inch 3 or 4 tpi blade (1 hp motor), and on the big saw, a 1 1/4 skip tooth blade. It is much better than the chainsaw that I used to use, and faster too.

robo hippy

Re: Bandsaw tooth count / size for cutting bowl blanks

#14

Re: Bandsaw tooth count / size for cutting bowl bl

Barry Irby

>It finally dawned on me that it takes me ten or fifteen minutes to change a bandsaw blade and ten or fifteen minutes to sharpen one with a Dremel. It's actually easier and less stressful to sharpen one than to change one. I am sharping 105 inch 3 tooth blades and I am not very good at it yet, but they cut 'almost' like new.

There was a post here about removing some of the teeth. I think the "trick" is to take out the right ones to not impart a "direction" to the blade. That is, take one left, one right, and one center. Not just at random.