Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Powermatic 3520 live center thread same as OneWay?

Posts

Powermatic 3520 live center thread same as OneWay?

#1

Powermatic 3520 live center thread same as OneWay?

Craig Daymon

>My Powermatic 3520A came with a live tail center that looks similar in shape to the OneWay and has threads around the cup center like the OneWay. Does anyone know if the threads are a match? I'd be interested to know if I could make use of some of the OneWay accessories that require the threads, like the spindle adapter.

Thanks,

Craig

Re: Powermatic 3520 live center thread same as OneWay?

#2

Re: Powermatic 3520 live center thread same as One

john lucas

>Craig They are the same. I have the powermatic live center and the Oneway adaptor that lets you put faceplates and chucks on the live center. John

Re: Powermatic 3520 live center thread same as OneWay?

#3

Re: Powermatic 3520 live center thread same as One

Craig Daymon

>Thanks John. I've been thinking about this and I think that should be useful, especially without having to buy the OneWay to do it.

I was John Jordan demo this weekend and he really made a remote switch look useful, so I was putting in an order for that. I'll see if I can find a place to get the OneWay adapter as well. Wonderful demo. I learned a great deal. Though, I think most of what I saw was his skill, I'll still hold onto the idea that I learned enough to do it myself.

-Craig

Re: Powermatic 3520 live center thread same as OneWay?

#4

Re:Get a 3/4"-10 tap and open up the possibilities

Al Crandall (NE of Indy)

>Live center adapters don't need to have external threads to work, nor do they need to be made from metal. Chuck up a hunk of hardwood, drill it with a 21/32" tap drill, counterbore it to fit over the shoulder at the end of the threads of your live center, and tap it. Harden the threads with thin CA glue, and retap it.

Drop something small, like a 6d finish nail, into the locking hole in the side of your live center and duct tape the hole closed on both ends. This will keep the nail from ejecting while the live center spins. Mount your new "dead center" in the headstock and screw on the wood which you tapped. Turn it to any configuration which suits you. A centering adapter for your chuck-to-vacuum bell is just a tenon which fits tightly into the chuck's mounting threads and backed up with a large square shoulder to seat the chuck against. Need a large centering cone? Turn one of them. Any shape you need will run true in the tailstock if you first tap the wood and turn it while mounted in the headstock. I believe every live center of this design should be accompanied by a tap to increase its usefulness.

Re: Powermatic 3520 live center thread same as OneWay?

#5

Re: Powermatic 3520 live center thread same as One

john lucas

>Craig John is just plain good at what he does. His technique is straight forward without fancy tools. He is extremely knowledgeable about wood and wood movement. His DVD on wood movement is excellent and should be viewed by all woodturners who use green wood.

Re: Powermatic 3520 live center thread same as OneWay?

#6

Re:Get a 3/4"-10 tap and open up the possibilities

Craig Daymon

>Thanks Al,

I have printed your post to a PDF and moved it into my "library of hints and tips".

Thanks again,

Craig

Re: Powermatic 3520 live center thread same as OneWay?

#7

Re: Powermatic 3520 live center thread same as One

Craig Daymon

>He was very good and the demo on Sunday was all day, so I heard a lot about wood movement and form. It was a good day. (Though, I have spent considerable cash thanks to his demo so I hope he doesn't come back too soon.)

-Craig

Re: Powermatic 3520 live center thread same as OneWay?

#8

Great tip Al! I learn something new here...

Paul in Phoenix, AZ

>...almost everyday.

Re: Powermatic 3520 live center thread same as OneWay?

#9

Re:Get a 3/4"-10 tap and open up the possibilities

Phil Joines Krum, Texas

>ENCO carries tha taps and the drill bit is on sale.

The tap is available from ENCO for $3.60, Model #311-6143. It's carbon steel but that's fine for tapping wood.

http://www.use-enco.com/CGI/INSRIT?PMAKA=311-6143&PMPXNO=942323&PARTPG=INLMK32

A reduced shank drill, Model #301-1042 is on sale for $2.99 http://www.use-enco.com/CGI/INSRIT?PMAKA=301-1042&PMPXNO=942079&PARTPG=INLMK32

They also carry an 1" x 8 TPI tap, Model #311-6183 for $5.30.

http://www.use-enco.com/CGI/INSRIT?PMAKA=311-6183&PMPXNO=943626&PARTPG=INLMK32

Unfortunately, they don't carry an 1 1/4" x 8.

Re: Powermatic 3520 live center thread same as OneWay?

#10

I Wonder Why

Stuart Johnson

>Unfortunately, they don't carry an 1 1/4" x 8.

Why does the price jump so when you go to the 1 1/4 x 8 tap size. They seem to be any where from 6 to 10 times the price of a 1" tap.

Re: Powermatic 3520 live center thread same as OneWay?

#11

It's a non-standard pitch outside lathe community.

Al Crandall (NE of Indy)

>The standard thread pitch for 1 1/4" threads is seven per inch. Evey one of us familiar with lathes thinks that 8tpi is normal, because 8 tpi is standard for 1" coarse threads and that is what smaller lathes had for decades. Seven is standard coarse tpi for 1 1/4" and the people selling taps reflect this in their pricing and stock lists. We "roundites" are in the minority, unfortunately. I believe, but I'm not positive, that the 8 thread series started in the oil industry, and that they used 8 tpi for everything up to about 6" diameter.