Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

lathe quandry

Posts

lathe quandry

#1

lathe quandry

john jesseph

>Hi everyone- I have something to run by you. I do a bit of turning for furniture, mostly chair parts. I have a couple of old PM 45 lathes, one which is 3 phase so I thought I would add variable speed to it. Meanwhile I am using the older single phase machine. I am moving in about a month or two, and am considering instead going with a brand new lathe. Should I just stick with fixing the 3 phase up, or go with a new lathe? I don't want to spend more than about 1500 on top of what I get out of my other lathes, and would prefer not to buy certain import machines. Any thoughts, suggestions, ideas? Thanks!! John Jesseph, soon to be in Bloomington, IN...

Re: lathe quandry

#2

just add an inverter

TDaniel

>The 3 phase motor you now have on the machine is not rated for use with an inverter but it will work a long time if you do not get it too hot. Avoid running it at slow speeds and check the heat until you get used to it. A 1 hp package would be all the lathe would need and I would rather have that than many of the imports.

Re: lathe quandry

#3

Re: lathe quandry *LINK*

georgetroy

>You might consider the American made Robust. A USA lathe made in Wisconsin with all the bells & whistles. You can read the information on the website here. Black is beautiful. GT


All American Robust lathe

Re: lathe quandry

#4

Re: lathe quandry

John Lucas

>I would look at the Jet 1642 or the powermatic 2035. After you sell the old lathe you should be able to get one of these. They work great. I've converted a couple of old lathes and really liked them but the new lathes really do work better. I do like the solidity of the old powermatics and if 12" swing is all you ever need converting your 3 phase with a variable frequency drive may be the best alternative.

Re: lathe quandry

#5

Thanks for the ideas!!!!

john jesseph

>

Re: lathe quandry

#6

Re: lathe quandry

Vicmarc.fan

>When you say you would rather not buy foreign it dosen't leave much. The only guy I know making a lathe in the USA is the Robust. In Canada you leave out Oneway, General. In Australia and NZ you leave out Vicmarc. In Great Briton you leave out Poolwood, VB 36, Stubby. I may have the countries wrong but it dosen't matter, each of these lathes is probly out of what you want to spend. It is crazy what you have to spend to turn wood these days.

Ron

Re: lathe quandry

#7

clarification

john jesseph

>I have a minute now to post a more appropriate response.

First, thanks for all the advice. I also looked in the archives and around other sites. When I said "certain imports" I really meant/mean Grizzly, etc., not the Australian or Canadian machines. Oneway, Vicmarc, etc would be great, I'm just not that much of a turner (yet).

I have replaced most of my imports with old American iron. I like the Robust idea, maybe a little more than I want to spend though, and couldn't try one locally. Will still give a look to Vega and Nova maybe. Delta is ruled out for a few reasons. I still wouldn't mind the old one with an inverter, but it might be time to bite the bullet and get a Jet 1642 (PM is a little more than I can rationalize). I drive a Honda, so I suppose I can turn on a Jet. Guess I should get pics of the PM 45s and the WT and get 'em on eBay...

Thanks again, back into lurk mode...