Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

slow jet mini

Posts

slow jet mini

#1

slow jet mini

bob davis

>gotta tell you..being able to slow my jet mini is like getting a new lathe. i run it most of the time on the middle belt,therefore sanding , applying finish at 1100 rpm.(switching belts is like switching table saw blades)..now i turn the new rheostat knob to a respectable speed and complete the job much better. SO thanks again to john lucas and others who made this possible..

Re: slow jet mini

#2

Re: slow jet mini

Carole Valentine

>Like switching table saw blades??? Aw, come on ... 20 seconds at most! But VS is nice isn't it? ;)

Re: slow jet mini

#3

Re: slow jet mini

bob davis

>another 20 to change back..get a combo blade..this the vs jet that now goes down to 60 rpm..

Re: slow jet mini

#4

Re: slow jet mini

matt fallon

>did you modify your mini somehow for this?

i did soem searches with jet/mini/rheostat etc but didnt see anything.

i just bought a jet non-vs. mini.

Re: slow jet mini

#5

Re: slow jet mini

john lucas

>Matt the non VS mini can't be slowed down short of changing motors. I've never had variable speed on my mini and don't miss it on that lathe. I really enjoy it on my big lathe. If I was turning larger items on my mini I would definitely want to be able to slow it down.

Re: slow jet mini

#6

Re: slow jet mini

bob davis

>i have two other lathes..only turn small items on mini..i now slow it down for sanding and applying finish