Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Spalted maple burl NE bowl

Posts

Spalted maple burl NE bowl

#1

Spalted maple burl NE bowl

Bill Grumbine (Kutztown PA)

>Last pic for now. This one is a piece of maple burl from a huge tree that was mostly maple burl I harvested a while ago. I have posted pics of other pieces from this tree in the past, as has my good friend Dominic Greco.


Maple burl, spalted a bit, with so many eyes that it would be very difficult to try and count them. Again, I took this along with me to my finishing class for finishing advice, since I was going anyway. I ended up French polishing this one, and then cutting it back a bit with some steel wool. It needs waxing for its final finish, but here it is so far.


This is a shot looking down. Size is 11" in diameter by 4" high, by 5/16" thick. I like the way the French polish came up on this, so I am going to use this on some more of the burls and other things I turn that I do not want to put on the buffing wheel.

Thanks for taking a look.

Bill

Re: Spalted maple burl NE bowl

#2

Re: Spalted maple burl NE bowl

George Van in WI

>Boy Bill you posted two beautiful bowls, they show your versatility well. I am also happy to see you posting again. I have a friend in the UP that uses French polish on bowls and I always like the looks of them. He likes it because he can do them in his living room chair. He does admit it gets his keyboard sticky at times.

Re: Spalted maple burl NE bowl

#3

Re: Spalted maple burl NE bowl

Rick Davenport

>Beautiful work Bill.

Did you core out some smaller bowls from this burl?

Vicmarc Fan wants to know.

Rick

Re: Spalted maple burl NE bowl

#4

Really nice, Bill

Don Henthorn

>

Re: Spalted maple burl NE bowl

#5

Wow Bill!

Dominic Greco in Richboro PA

>Bill,

Looks fabulous! Another prime example of that spectactular "Omni Burl".

If I can get out to the shop for more than 15 minutes, I may have to try that finish out.

See ya around,

Dominic

Shhh.....! Babys sleeping!

Re: Spalted maple burl NE bowl

#6

Re: Spalted maple burl NE bowl

Bill Grumbine (Kutztown PA)

>Thanks guys!

Rick, I have one core, and may get another. It is fairly punky, so I do not know how it is going to hold up. But I should get at least one more bowl out of it.

Dominic, I think if you give this finish a try, you will really like it. I hate trying to get a decent shine on bowls like this with the buffing wheel. Even if I can avoid having it snatched from my hands, I end up picking out millions of bits of lint from the spikes, inclusions, etc.

Bill