Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Drying Fresh Cut Stock

Posts

Drying Fresh Cut Stock

#1

Drying Fresh Cut Stock

Joe Burke

>We've had a tree or two cut, one big crabapple, and as I've done in the past, I'm trying to save some wood for future, nostalgic use. On the lathe .... btw.

The log sections were cut to roughly the same length as diameter and then halved through the heart .... in some cases not halved ... wherever the heart dictated. I painted the ends with a good coat of latex paint.

I thought of bagging them to slow moisture loss but simply didn't follow through.

I guess the questions are .... how best to store them now and how much checking is to be expected. I've been down this road before and I'd like to give this batch a bit more attention.

I sold my lathe when I moved my shop and will wait until I can get what I'd like before I leap again, so, no wet turning options. I need to put them away and let them do their thing.

The tree was cut a week ago.

Thanks

Re: Drying Fresh Cut Stock

#2

Re: Drying Fresh Cut Stock

Don Henthorn

>I've never had any luck with latex. I would suggest at least two more coats.

Re: Drying Fresh Cut Stock

#3

Re: Drying Fresh Cut Stock

jon gaynor

>I also have not had good luck with latex paint. Checking was horible. I have had better luck with either teh commercially availble wax emulsion (anchorseal) or wrapping in heavy duty shrink wrap (Cosco or Sam's Club). The roll is approx. 14" wide and 5" diameter ~ $12. The shrink wrap also seems to help keep borers inside their respective pieces of wood.

Good Luck

Re: Drying Fresh Cut Stock

#4

Apple wood

Mike Brazeau

>Joe - I would be tempted to leave a couple of pieces outside, just like firewood. Apple when it ages and begins to rot turns a beautiful brown color that with an oil finish is gorgeous. Lots of pretty grain. Keep an eye on it and get to it before it does rot and then bring inside to dry. The odd crack that forms gives character. I fill them with a mixture of ground red shale and epoxy which goes well with the color. This came from our firewood pile. 4" in diameter by 7" high.

Mike


img