Vaccum pump
ben d.
>Can someone tell me if a vaccum pump with these spec.'s would be enough to build a vaccum chuck system for lathe use.??
Specifications: 1050 Cu/In/Min, 12/18 psig, suction 20 in/Hg, 1/45 HP, 3/8 NPT ports, 115 VAC / 1.2 Amps.
Knowledge You Can Build On — Est. 1998
Vaccum pump
ben d.
>Can someone tell me if a vaccum pump with these spec.'s would be enough to build a vaccum chuck system for lathe use.??
Specifications: 1050 Cu/In/Min, 12/18 psig, suction 20 in/Hg, 1/45 HP, 3/8 NPT ports, 115 VAC / 1.2 Amps.
Re: Vaccum pump
Pete in Holland, MI
>Minimal on the maximum vacuum allowable. Would guess by the HP that the CFM is really low and your system wouldn't tolearate any leaks. Look for something 1/4-1/2 hp, in my opinion. Mine is 3/4hp (got a great deal on the beast).
Pete
Re: Six-tenths of a cfm. Keep looking
Al Crandall (NE of Indy)
>
Re: Vaccum pump *LINK*
kevinT in T Bay
>Ben, Someone post this a while ago.
Cheers KevinT in T Bay
http://www.surpluscenter.com/item.asp?