Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Which chainsaw safety chaps to get?

Posts

Which chainsaw safety chaps to get?

#1

Which chainsaw safety chaps to get?

adrien

>I've decided to get some safety clothing for use with my chainsaw. I looked in Bailey's catalog on line but the information, for a novice, is not very helpful for making a choice. Stihl's site mentions the clothing, but apparently doesn't sell them; they have "six or nine layer" chaps. Given my expertise, I figure two pair would be about right.

Please offer some specific suggestions as to the what to get and where.

TIA

Re: Which chainsaw safety chaps to get?

#2

Re: Which chainsaw safety chaps to get?

Rick Davenport

>My wife and her friends passed around a romance novel about a studly cowboy wearing nothing but chaps.

It's been a standing joke that they are going to get their husbands some chaps for Christmas.

I'll be watching this thread closely!

;-)

Rick

Re: Which chainsaw safety chaps to get?

#3

Re: Which chainsaw safety chaps to get?

W.C. Turner

>When I bought my Husky saw, I just purchased the Husky chaps, & Husky Hard hat with the face screen, & earmuffs. Seems like I paid about $35-$39 for the chaps. Probably increased in price by now, that was 3 years ago.

Re: Which chainsaw safety chaps to get?

#4

Re: Which chainsaw safety chaps to get?

Bill Crommett

>Adrien: The best safety measure is to wait until you nick your leg with the chainsaw, and after that you will be so carefull that chaps aren't needed. DAMHIK

Re: Which chainsaw safety chaps to get?

#5

Got a pair... *LINK*

Peter Teubel

>Well, today is your lucky day. I have a brand new pair of 9-layer Stihl ProMark brand chaps the I bought last month on eBay and found out they are too short for me. They are adjustable from 30" to 42" at the waist and their length is 32"...that's TOTAL LENGTH, not inseam (which is where I made my mistake). Needless to say, they only come half-way down my shins. I need at least 38" length (I'm 6ft). I paid $50 plus $10 shipping. So if your interested, I'll sell them for $50 INCLUDING shipping via USPS Priority mail anywhere in the US. Below is the link to the item like I have.


Stihl ProMark Chaps

Re: Which chainsaw safety chaps to get?

#6

Re: Which chainsaw safety chaps to get?

adrien

>Hmm. Chaps and a chainsaw in the bedroom.... Don't think SWMBO'd go for it.

Re: Which chainsaw safety chaps to get?

#7

Re: Which chainsaw safety chaps to get?

Bill Neddow

>Adrien, don't buy the chaps. Get the pants. They are twice as comfortable and easy to put on. The chaps are not. I had to buy chaps because they did not make pants big enough to fit me. However, I lost some weight and can get into the pants now. What a relief! Also, get the nine layer. They cost quite a bit more, but believe me, if you touch your leg with that chain, you will be happy you did. Chaps or pants are safety gear and you should not be buying something because it is inexpensive.

Re: Which chainsaw safety chaps to get?

#8

Re: Which chainsaw safety chaps to get?

Pat Mulligan

>I had a set from Bailey's and they served me well.

Re: Which chainsaw safety chaps to get?

#9

Re: Which chainsaw safety chaps to get?

Barry Turner

>Make sure your chainsaw chaps have more coverage........

Re: Which chainsaw safety chaps to get?

#10

Sorta Like Buying A Cheap Parachute!

Barry Turner

>Cheap stuff is great until you have to use it!

Re: Which chainsaw safety chaps to get?

#11

Thanks Bill (and Pat)

adrien

>Thanks Bill (and Pat).

Baileys seems to have only one type of pants, two layers of kelvar.

Husqvarna has 9 layer chaps, but the pants don't have specifications.

And Stihl mentions 9 layers only for the denim pants.

I guess I'll shoot for the Stihl 9 layers pants: there's a Stihl shop nearby in Morristown, NJ

Thanks again....