Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

I'm still getting wood! Thanks, Michael!

Posts

I'm still getting wood! Thanks, Michael!

#1

I'm still getting wood! Thanks, Michael!

Carole Valentine

>Today I got a big box from Michael Sinclair all the way from the Orkney Islands! It contained a big blank of Lime, several blanks of Olive Ash, a piece of Orkney Elm and a chunk of Ebony! It also contained a nice letter from Michael and a copy of the Living Orkney magazine which I will thoroughly enjoy reading! When I was putting the wood away, one piece of the Olive Ash escaped and landed under the lathe. I mounted it up and started turning it. Lovely wood! It has no finish yet as I am deciding if I want to leave it natural.


img

Re: I'm still getting wood! Thanks, Michael!

#2

Beautiful

Terry Quiram, Roanoke Illinois

>Carole

What a beautiful piece of wood. Your form is very nice. I like this piece a lot.

Terry

Re: I'm still getting wood! Thanks, Michael!

#3

Ken Oakely, any comments on this?

Eddie Pacheco, San Jose, Ca.

>

Re: I'm still getting wood! Thanks, Michael!

#4

Nice form on that.

Eddie Pacheco, San Jose, Ca.

>Carol,

Sorry for the little snippet in the prior post, I couldn't resist.

How do you carve out the inside of those vessels that you make? I've done just 3 hollow forms and to me it was a challenge to carve out the inside and I was working through a larger opening. You don'thave much room for any tool chatter or inattention. Do you just go by feel and stop the lathe often to check the wall thickness?

When I was doing my hollowing I found myself looking from the top of the workpiece to sort of visualize where my cutter/small scraper was.

Is this what you do as well?

My hollow forms were done with dry wood and I'm wondering if this contributes to some additional chatter and commotion.

I know, in effect, I'm asking for a turning lesson here, but a brief description will help me a lot.

Thanks.

Re: I'm still getting wood! Thanks, Michael!

#5

Re: Nice form on that.

Carole Valentine

>Thanks, Eddie. I use the Kelton hollowers and yes, I do stop the lathe often to check thickness and inspect the inside with a tiny light I have. I go by feel and I use my body rather than my arms. When it starts getting down to final thickness, I start holding my breath! LOL I also use my ears - tap along the outside of the vessel and you can hear where the thick parts are. Sometimes it's tough to get into the far reaches of the shoulders, but it can be done. I used the curved hollowers with a 3/8" shaft on this piece. I have found that chatter usually can be reduced by speeding up the lathe a bit and taking finer cuts with very sharp tools. I also swing my headstock out so I can keep the tool against my body. Some dry woods will definitely give you a little more "commotion".

Re: I'm still getting wood! Thanks, Michael!

#6

Re: I'm still getting wood! Thanks, Michael!

Jennifer@Indy.USA

>Carole, this is lovely! Your forms are really top notch. You are on such a roll....it's really ticking me off girl : )

Keep em' coming Carole....I love watching what comes off your lathe.

Jen

Re: I'm still getting wood! Thanks, Michael!

#7

Re: I'm still getting wood! Thanks, Michael!

Ed Karch

>You have done it again. Beautiful. What size is it?

Re: I'm still getting wood! Thanks, Michael!

#8

Re: I'm still getting wood! Thanks, Michael!

Carole Valentine

>Thanks, Jenn. After a couple of days worth of crap coming off my lathe, it felt good to finally have something go right! LOL

Re: I'm still getting wood! Thanks, Michael!

#9

Re: I'm still getting wood! Thanks, Michael!

Carole Valentine

>Thanks, Ed. It is 4" wide and 2" high. Weighs 3 oz.

Re: I'm still getting wood! Thanks, Michael!

#10

Re: I'm still getting wood! Thanks, Michael!

Steve in NC

>Carole

This piece is beautiful. Your hollow forms are an inspiration. I think I am going to have to invest in some smaller tools and give this a try.

Thanks for sharing.

Steve

Re: I'm still getting wood! Thanks, Michael!

#11

Re: I'm still getting wood! Thanks, Michael!

Ron in Drums PA

>Very Nice Carole

Re: I'm still getting wood! Thanks, Michael!

#12

Re: I'm still getting wood! Thanks, Michael!

Jennifer@Indy.USA

>Shhhh...Carole you're not suppose to tell that part :)

Re: I'm still getting wood! Thanks, Michael!

#13

a new technique...

Ed Kelle

>ya gotta drop the wood before you turn it, and it's a guaranteed winner... I have to start trying that

Really nice piece Carole, I like the natural look for this, I seem to be heading that way on all my pieces lately

Re: I'm still getting wood! Thanks, Michael!

#14

Re: I'm still getting wood! Thanks, Michael!

Gil Jones

>Sweet piece!! Fine wood.

Re: I'm still getting wood! Thanks, Michael!

#15

Re: Ken Oakely, any comments on this?

Ken Oakley-Sunny St. Cloud, Fla.

>I am under the weather with some kind of bug so all I can say is I agree. Would like to see it with a finish on it.

Re: I'm still getting wood! Thanks, Michael!

#16

Re: I'm still getting wood! Thanks, Michael!

Pat Mulligan

>You deserve it,Carole.Nice little hollow form that is.

Re: I'm still getting wood! Thanks, Michael!

#17

Re: I'm still getting wood! Thanks, Michael!

George Van in WI

>Nice job Carol, I like the ash high contrast pronounced grain in this one. Ash is one of my favorites when the grain is used right and you did on this one! I am anxious to see your choice of finish, I would like to see very flat or a fixative. I do have some roughed and will have to make that decision soon myself.