WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

White glue soak questions

Posts

White glue soak questions

#1

White glue soak questions

Ed Kelle

>Somehow, I have never heard of this method until a few days ago, no idea how I could have missed it with all the reading I do. Anyhow, is there an article anywhere which gives more info on this?

Some of my questions are...

I assume you do a normal roughout of the punky wood before the soak, to the 10% thickness method right?

Once you have made the mixture and used it, will it keep for a while if stored in a lidded container?

What about drying after the soak? We talking days, weeks, months? Since you just put moisture back into the wood even though it was mixed with glue.

How does it effect sanding, does it gum up sandpaper instantly?

Any finishes that will not work on top after? I would most likely use a light coat of Deft after.

Right now it not a total priority for me since I just finished a spalted piece, but it would be nice to keep in mind for the future.

Maybe we should turn this into a chat some other nite if our guru's have some experience with this method that they would like to share with everyone.

If I missed this info while I was away just point me to where was previously posted, no need to type it all out again. I tried a search but didn't find much.

Any answers would be appreciated, thanks!

Re: White glue soak questions

#2

Re: White glue soak questions

Wally Dickerman in Arizona

>I believe that the original post on glue soaking was mine. I've done this procedure a number of times in the past.

Does it always work? I've had varying degrees of success. You're working with rotton wood.

I've usually done this with semi-dry wood, so the roughed-out wall thickness has always been less than 10%. However, it depends on the wood you're using. It will warp as it dries. I've always soaked for about 24 hours. I haven't experimented by soaking for a longer period.

Drying time depends on how wet the wood was before the soaking. I've finish-turned the piece in a few days or a few weeks, depending on how wet/dry the piece is. I prefer to let the piece become stable before I turn it.

It will affect the finish. I've always used a couple of coats of semi-gloss Deft when I'm turning soft, punky wood, followed by my regular oil finish. I seem to get a satin instead of a gloss finish.

I store the remaining 50/50 solution in a Clorox jug. It'll keep for perhaps a year or two.

A real plus when doing the glue soak is that small cracks seem to disappear. The wood swells and you're soaking it in glue.

Wally

Re: White glue soak questions

#3

Thanks Wally!

Ed Kelle

>Just the answers I was looking for. I'll be sure to try this next time.

We've got to talk you into writing a book, you are a goldmine of knowledge

Thanks!

E