Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

A finish for Ash

Posts

A finish for Ash

#1

A finish for Ash

Ryan Dicker in Renfrew, Ontario

>Hi

I am looking for some finishing advice for ash. I've found that most finishes produce a brown color that is relativly unappealing. Does anybody have a trick for getting a pleasing finish on ash?

Thanks

Ryan

Re: A finish for Ash

#2

Re: A finish for Ash

GeeSeaWhy

>If you want to keep ash as pale as possible, try a water-based finish like General's polycrylic or Crystallac. You can also make it even paler with 2-part bleach - do the sanding first, the bleach doesn't penetrate very far.

Graeme

Re: A finish for Ash

#3

Re: A finish for Ash

GaryG in MD

>Hi Ryan,

This question has been answered before, at length by many responders, in the past year or so. You can go to the WC "turning archives" (see link on left side of home page under "Archives") and do a search with keywords like "ash" and "finish" to find them.

Regards, Gary

Re: A finish for Ash

#4

Re: A finish for Ash

Ryan Dicker in Renfrew, Ontario

>Thanks for responding guys.

I probably should have did a search before making a new thread about it.

Thanks again,

Ryan