Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Tommorrow is the New Lathe Day

Posts

Tommorrow is the New Lathe Day

#1

Tommorrow is the New Lathe Day

DaveAnderson (Pac NW)

>Hello to all,

I posted a while back when my wife said to buy a bigger lathe.

After greatly resisting temtation to order a OneWay 1640 or a Powermatic 2035B. I looked at the budget and decided to go for the Jet 1642VS 1/12 hp. I missed the Amazon 10% sale ( they could not gaurantee delivery before the end of April) Today I Called Frank at Equipment Sales and Surplus in Auburn, WA (Seattle Area) To see if they had any recon lathes in stock. No Luck! While I was talking to him about the Jet lathe I mentioned the Amazon sale. He told me that with free shipping that price was WAYYYY! below their cost.. There was no way he could come close. So I said well---what if I picked it Up? what would be the price. When he told $1550.00, I told him that I would be down tommorrow!!

Sometimes It's Better to be Lucky Than Good!

Dave Anderson

Sliding down the slippery slope and singing all the way!

Re: Tommorrow is the New Lathe Day

#2

Re: Tommorrow is the New Lathe Day

Scott Hurley in N. VA

>Dave,

I bought one during the Woodcraft sale last Fall, and I love it. It works like a champ. One note - if you bought the 1.5 horse, don't try to run it on a GFCI circuit - it will trip the GFCI as soon as you turn it on. My only complaint is that in order to lock the spindle, you either have to hold the little button, or screw the thumbscrew into one of the 'indexing' holes. Enjoy.

Scott

Re: Tommorrow is the New Lathe Day

#3

Re: Tommorrow is the New Lathe Day

Rick Davenport

>Congrats Dave.

Did you bribe any strong-backed friends to help set it up?

It cost me a bottle of wine and some snacks.

The worst part is that I had some wine with them so couldn't try the new toy until the next morning.

Enjoy!

Rick

Edmonds, WA

Re: Tommorrow is the New Lathe Day

#4

Re: Tommorrow is the New Lathe Day

Steve

>Dave, I've had my Jet 1642 for over a year now and really like it. I built a balast box that was designed by Dominic. The plans for it are on this site under "Articles." I"ve attached a picture of mine. Happy turning! Steve


img

Re: Tommorrow is the New Lathe Day

#5

Re: Steve, anyone with a shop

Allen Neighbors

>that clean has got to have a warped mind.... :o)

Just kiddding... Good looking ballast box..

Allen