Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

new technique

Posts

new technique

#1

new technique

john lucas

>Here is a sample of a new technique I'm working on. It has some accuracy problems but this was just a test to see if my idea would work. It's done with inside-out turning. If I'm going to let the edges show I need to be much more accurate in the depth of my rings and of course need to make them fit the grooves more accuately.

I cut 4 pieces of wood perfectly square, mounted them on the lathe as close to center as possible. Turned the ring grooves, turned the rings and inserted them. Then I cut the blank apart and reversed all 4 pieces. When Put them together to check for fit they were off over 1/4". I don't know where the problem lie's so I'll check every single step next time. Obviously I was off somewhere.

Hope the next inside out project goes better. It's waiting for the glue to dry.

Re: new technique

#2

Oops need Photo

john lucas

>

Re: new technique

#3

Re: new technique

Norm Smith in Nova Scotia

>Hi John, I am sure that before long you will perfect the tecnique problem.

Norm

Re: new technique

#4

Re: Oops need Photo 

john lucas

>


img

Re: new technique

#5

Jim DeLaney, Austintown, Ohio

Re: new technique

Jim DeLaney, Austintown, Ohio

>Just a guess, but I suspect the �" you 'lost' was due to the saw kerfs. Did you 'split the line' or cut to the right/left of it?

Not sure if it'd work, but what about cutting the main piece into four before turning it, and using the 'brown paper' gluing technique to put them back together for turning? Might work, although you'd also have to very carefully cut the rings with a razor saw before splitting the base block back apart. Bear in mind, I'm purely speculating. I've never tried such a thing.

Jim D.

Re: new technique

#6

My thoughts exactly.

Brian Hahn in SW Wisconsin

>It pays to read before posting!

Re: new technique

#7

Re: new technique

john lucas

>Jim I did start with 4 pieces. I glued them together instead of a paper joint because these would be outside corners and how they looked would not affect the final project or the accuracy of the project.

The outside corners of the original piece would become the inside corners and should have been accurate since they were square to begin with. I would think that any details turned into the face of the first glue up would align exactly when you rotate the square pieces 180 degrees and yet they were off.

I don't think the saw kerf was the problem becuase everything was referenced from the square edge that didn not include the final saw kerf.

Re: new technique

#8

Re: new technique

Bill Stehman

>John,

You are on the right track. I do celtic knots in bowls and have done inside out pieces but found in both it is getting the "exact center" when re-mounting the piece. Just food for thought. Excellent work and fun fun fun.

bill

Re: new technique

#9

give it up...

TDaniel

>sorry John, I just don't see anything here worth pursuing. I am looking for beauty but I can't find it. Different, yes; pretty?, no.

Re: new technique

#10

Re: give it up...

Mac

>C'mon Terry,,dont beat around the bush,tell us what you really think.

Re: new technique

#11

Keith Tompkins

Re: Oops need Photo

Keith Tompkins

>Hi John, I see tons of possibilities here...especially if you can get more rings to fit into each segment.

NOW you know how I feel.....this piece is 1200 segments, ALL compound miters cut on the table saw...each mistake compounds the next...


img

Re: new technique

#12

Re: Oops need Photo

john lucas

>Keith I'll do that next week when I have a spare hour or so. I just tuned my table saw again. Now I've go to save for a better blade, then I'll be ready to tackle some things that I've put off for awhile. Now that I have a dry shop I might be able to tackle some segmented work agian.

Re: new technique

#13

Re: give it up...

john lucas

>Mac Terry's just jealous cause it wasn't turned on a Vicmarc. There are tons of possibilities here. I had to make one to see where the problems lie. That always helps me find other things to do.

Re: new technique

#14

Re: give it up...

Carole Valentine

>Naw, he's just in a bad mood 'cause Elaine threw away his yellow leotards. She was afraid he might be tempted to wear them at the Gathering. ;)

Re: new technique

#15

Re: give it up...

john lucas

>Carole do you think we can talk him into dressing like an artist at the gathering.

Re: new technique

#16

stepping stone, yes

TDaniel

>You are right John, when trying to come up with something new it is likely that you will make a bunch of culls on the way there. Any time you try something new you will learn something new that will help on the next piece. I think many of us quit too soon and are satisfied with anything that is new whether it is pretty or not. Don't quit yet. :)

TD