Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Any Welders in the San Jose Area?

Posts

Any Welders in the San Jose Area?

#1

Any Welders in the San Jose Area?

Dave Lambert

>I was wondering if there are any woodturners who have welding capabilities in the San Jose, California area. I need to fix an old Delta floor stand tool rest that has several pieces broken out of it following a major catch. I also have the parts for five homemade faceplates that need welding together.

Money is very tight right now, so ideally, I would like to trade for it. I have lots of turning blanks(small to very large), rough outs(platters, bowls, hollow forms), spindle stock etc. I do teach certain aspects of wood turning, so I could trade for time. Just give me an idea what works for you.

If you can help, please just email me directly. Thank you!

Re: Any Welders in the San Jose Area?

#2

Re: Any Welders in the San Jose Area?

Bob Fawcett

>Dave,

I am not near so can't help with your welding.

Your stand is probably cast iron. Cast iron is extremely difficult to weld and likely beyond the capabilities of most home shops. You may be able to repair it with epoxy or JB weld.

Re: Any Welders in the San Jose Area?

#3

Re: Any Welders in the San Jose Area?

Pete in Holland, MI

>Bob -

Cast iron is weldable or braze-able, but it takes a special techniques and filler rod. Would avise against any epoxies to hold it together. Check the yellow pages, or visit local machine shops for their recommendations on welding fources for your cast iron. Might start passing the word around in the neigborhood or church for those talents also.

Good luck.........

Pete