Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

What to use to gild wood?

Posts

What to use to gild wood?

#1

What to use to gild wood?

Carole Valentine

>I have seen some turnings that have been gilded. What is used for that? Regular gold leaf (the thin sheets placed over an adhesive) doesn't work very well. I tried the Plaid Liquid Gold Leaf but can't seem to apply it without marks and it is too soft to rub them out when it is dry. Just wondering what is the best thing to use and the best technique. I want to apply it to only portions of a turning that will be masked off from the ungilded parts.

Re: What to use to gild wood?

#2

Richard Allen

Re: What to use to gild wood?

Richard Allen

>Gold leaf is indeed the product. Make sure the wood is glass smooth. The smoother and harder the wood surface the smoother the applied gold leaf can be. Many folks use many layers of gold leaf. You can get a hard smooth surface by warming the turning and then soaking with epoxy. Let the epoxy cure for several days. Then sand to a very high grit before using the size. The traditional burnishing material is amber.

Gold leafing is simular to many other activities. Practice will improve your results.

Good luck

Re: What to use to gild wood?

#3

Re: What to use to gild wood?

JamieDonaldson

>I've had good results using a Rub'nBuff paste material, available in a rainbow of colors. It won't give the shine of a true metal leaf, but its sure easier to use.

Re: What to use to gild wood?

#4

Re: What to use to gild wood?

john lucas

>Carole It will show anything that is underneath so you need to either live with it and decide that the wood grain can show through our you have to fill in all those pores. Are you using a base paint underneath. Most guilding has an undercoat. As someone else said it may take several coats of the gold leaf.

Jamie is right. I love rub-n-buff. It doesn't look like gold leaf at all but is sure does give a nice color.

Re: What to use to gild wood?

#5

Re: What to use to gild wood?

Peter Charles Fagg

>Carole, I often use a paste made by Liberon for my turnings, especially on exotics.

It is recommended to paint the surface with a Red paint like substance first which appears to enhance the gilding if large areas are to be covered. Obviously not the case where only the grain is to be enhanced.

The picture shows a piece of Padauk. Apologies for the poor quality of image.

Regards Peter.


img

Re: What to use to gild wood?

#6

Re: What to use to gild wood?

Carole Valentine

>Thanks, guys. I think I will try and find the Rub n' Buff stuff. Nothing other than real gold looks like real gold anyway and I don't necessarily need that look.

Re: What to use to gild wood?

#7

Re: What to use to gild wood?

john lucas

>Carole Real gold leaf follows the textures even better than fake gold leaf so the surface has to be even better. It sure is pretty though.