Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Small Spalted Poplar Bowl

Posts

Small Spalted Poplar Bowl

#1

Small Spalted Poplar Bowl

Chris DiCiaccio

>This is my 5th try at a bowl. Though it is only 3 1/4' x 1 7/8", I learned more on this bowl than on all previous bowls. Somehow I found a niche with my bowl gouge and it started cutting like it should. What a difference! I think I understand a little more about bevel rubbing now. Once this happened, I started enjoying it much more and it didn't take near as long. Also, I finally got a more thin wall than before. Looking forward to trying what I learned on a bigger bowl. Anyway, still trying to learn, mostly from trial and error and a couple of books.


img

Re: Small Spalted Poplar Bowl

#2

Re: Small Spalted Poplar Bowl 

Chris DiCiaccio

>


img

Re: Small Spalted Poplar Bowl

#3

Re: Small Spalted Poplar Bowl 

Chris DiCiaccio

>


img

Re: Small Spalted Poplar Bowl

#4

Re: Small Spalted Poplar Bowl 

Chris DiCiaccio

>


img

Re: Small Spalted Poplar Bowl

#5

Re: Small Spalted Poplar Bowl

Jennifer@Indy.USA

>You're doing great Chris. A lot of us learned this way, by trial and error...and by posting pictures of success's....and failures. This little guy looks just fine. In fact, you will probably find that turning a larger bowl will be easier. The curve to the bottom of the bowl won't be so steep and you'll get more of a flow with your gouge. At least that's the way it is for me. Keep turning them out, Chris. It's really a treat to watch you progress!

Jennifer

Re: Small Spalted Poplar Bowl

#6

Re: Small Spalted Poplar Bowl

Ben Aragon

>Great job,

Your hooked.

Ben

Re: Small Spalted Poplar Bowl

#7

Re: Small Spalted Poplar Bowl

Bob Fawcett

>Any words of wisdom for us other beginners?

Re: Small Spalted Poplar Bowl

#8

Re: Small Spalted Poplar Bowl

Carole Valentine

>Chris, you are dong great! Keep at it.

Bob, I am not far from a beginner myself, but I have noticed one thing which seems to be really common and I am not sure why it is. So many beginners start with deep, fairly straight, steep-sided bowls. IMHO, this is the worst form you could possibly start with. It makes it hard to learn how ride the bevel on the tool to follow a curve. It is also very hard to make the transition from side to bottom. A shallow, gently curved form is so much easier to learn on! It's makes it easier to learn which presentations of tool to wood result in the best cuts. You also don't have to be a contortionist and you learn to move the tool with your body not just your hands. JMHO.

Re: Small Spalted Poplar Bowl

#9

Re: Small Spalted Poplar Bowl

Bob Fawcett

>Thanks Carol.

That is the kind of information that is hard won and valuable for us beginners.

I bought my lathe last month (just so you know how beginner I mean). I have turned 3 bowls. My wife uses one to put her jewelry in. The other 2 sit on the kitchen counter to remind me of what I did right and what I did wrong.

I have been practicing spindles because my wife wants a 4 poster bed. I have 2 practice lower legs now, and plan to start another this weekend.

I ordered the Ernie Conover book and video "Turning for Furniture" and hope it will have some useful info.

I bought a Jet mini and have an exension bed. This is probably not really a big enough lathe for a bedpost, but that hasn't stopped me yet.

I built a stand for the lathe that is basically a large sawhorse. I did add some old hard bags of concrete to the base. So far this works, even for bedposts.

I am getting long winded so I'll stop here.

Re: Small Spalted Poplar Bowl

#10

Keith Tompkins

Re: Small Spalted Poplar Bowl

Keith Tompkins

>HI Carole, an astute observation....I think there are several reasons beginning turner's work seems to look the same. One, the chuck dictates the size of the foot (usually too large), which results in straight sided bowls. Because of the large foot, there is no room for smooth flowing curves. Another reason is the turner is working with a blank that was cut by the supplier. The dimensions of the blank set the overall form. We tend to be frugal, and don't want to waste wood. This helps explain the straight sided bowls; we want to use as much of the blank as possible. New turners usually don't consider form, they are focusing on learning technique. Therefore, the form usually needs some improvement. The good news is...by studying form, newbies can speed their progress tremendously!

Re: Small Spalted Poplar Bowl

#11

Re: Small Spalted Poplar Bowl

Barry Irby

>I agree with both or you and I would add that beginners should invest in books and videos and should join a local turning club. Also, take a lesson or two at a local Woodcraft Store or where ever and find some turners that will give you a chance to turn on their lathe and watch them turn. Five minutes with a good instructor might be worth days of experimenting and trying to teach yourself. I took a class with David Ellsworth at Arrowmont, after I had been turning for many years. He took the bowl gouge out of my clenched hands (probably to save it from further abuse) and with one the fingertips on hand guided it across my work piece. It was like the difference between an old beat up truck and a sports car. A revelation for me. Good work on the bowl, your skills are ready for a big move forward, you are just getting to the fun part.

Re: Small Spalted Poplar Bowl

#12

Go For It!

Barry Turner

>Finish that bed. That way you can validate your hobby and all the time and money you are spending on this insane hobby of yours.

Don't be put off by the limitations of your equipment. Forge right ahead. What better way to learn about the limitations of your equipment and why they are limitations?

Sometimes ignorance is bliss. It's amazing how much difficult stuff you can pull off, and amazingly well too, before you learn it's way beyond the capabilities of your equipment and your own skills.