Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Help with a club challenge idea

Posts

Help with a club challenge idea

#1

Help with a club challenge idea

David Breth

>Last night at my turning club meeting, I made the suggestion that we consider a club challenge. President thought it was such a great idea that I should go think of some ideas and present them next month. Hmmmm.

My thought is to come up with something that everybody can participate in - something that is not overly technical and does not require tools beyond the basics. We have a lot of new turners, so I want to make sure it isn't beyond them, but I would like the idea to be kind of unique so it sparks the interest of all. I'm looking for suggestions.

So far I've only come up with a couple of ideas:

End Grain Bowl

Turn something to the shape of the fruit of your choice

Turn a using only one tool

Turn a candle out of the wood of your choice (candle in a base that is lit).

I kind of favor the candle idea because it puts pretty much everybody between centers on spindle work, would be good practice for newbies and allows some creativity for more experienced turners.

David B.

Re: Help with a club challenge idea

#2

Re: Help with a club challenge idea

David Breth

>correction to original message. the third suggestion was supposed to be "Turn a - insert something clever - using only one tool".

David B.

Re: Help with a club challenge idea

#3

Re: Help with a club challenge idea

Raymond Overman in SC

>Our club has a chapter challenge each month that incorporates the techniques used by the demonstrator the previous month. It's fairly liberal in the interpretation and provides for both novice and expert turners.

Re: Help with a club challenge idea

#4

Re: Help with a club challenge idea

John Lucas

>David That is one of the more successful things our club does. In fact it is so successful we felt like we had to divide it into Novice and Advanced divisions so more people could win.

We try to relate the challenge to the last club meeting demo. For example last month we had a platter demo so this month we will have a platter challenge. The members who want to participate bring thier work and place it on a special table with a number. Then we all vote on who we think is the best. The winner gets extra tickets to go into the year end drawing we have for prizes.

Occasionally we come up with something completely different such as the one we just had on making anything from a 1 foot piece of pine 2x4. We've also tried Miniatures, anything under 2". Some sort of texture on your project, Some sort of color on your project, etc.

Put it out to your members for suggestions.

Re: Help with a club challenge idea

#5

Re: Help with a club challenge idea *LINK*

chris rolke

>at the ovwg we had a contest using a 2x4 96 inches

a lot of thought went in to the projects

my personal entry is shown below

i liked the contest because it gets you thinking about different ideas


img

http://www.ovwg.org/New-OVWG-Site/Meetings/2X4X8%20Contest%20Jan%202006/index.htm

Re: Help with a club challenge idea

#6

Miniatures

Jennifer@Indy.USA

>David we had a challenge once that the miniature piece had to fit inside a 35mm film canister. It was quite fun actually.

Jen

Re: Help with a club challenge idea

#7

Re: Help with a club challenge idea

keith zimmerman, Normal, IL

>In the Central Illinois Woodturners, we have done goblets, scoops, gavels, and tops (with a spinning competetion). This month, our challenge is to make a femisphere.

keithz

Re: Help with a club challenge idea

#8

Re: Help with a club challenge idea

Don Tewell

>I hate to sound stupid (but if you are, you are) but what is a femishpere?

Re: Help with a club challenge idea

#9

Re: Help with a club challenge idea

Don O.

>David, our club has done mushrooms, a bowl from a 2x4x8, anything made from wood that came from a single shipping pallet, and now we have just been challenged to make some thing out of plywood.

Good luck and have fun, Don

Re: Help with a club challenge idea

#10

Dick Hines

Re: Help with a club challenge idea

Dick Hines

>we did the fit into a 35mm film can once and one guy turner a film can and then turner a mkiniture bowl to go inside.

Re: Help with a club challenge idea

#11

Re: Help with a club challenge idea

David Breth

>Thanks everybody for these great responses. I like a lot of the ideas - it will be tough to present just two or three to the group to let them choose.

David B.

Re: Help with a club challenge idea

#12

Re: femisphere URL here.

Al Crandall (NE of Indy)

>http://www.ovwg.org/New-OVWG-Site/Techniques/Femisphere.pdf

Re: Help with a club challenge idea

#13

Re: Help with a club challenge idea

Bill Neddow

>We also have a club challenge at our club. At one point it was becoming too competitive, so we started a draw, which has taken the edge off the competition. Everyone who brings a piece for the challenge has a chance to explain what he or she has done and at the end of the explalnation, they are given a raffle ticket. At the end of the "challenge' part of the evening, someone who has not taken part draws one of the raffle tickets from a hat (or bowl), and the holder gets a gift certificate for Lee Valley Tools. That way, even beginners can win. This has been a very popular change.

Re: Help with a club challenge idea

#14

Re: Help with a club challenge idea

David Breth

>We do something along those lines already. We have a show and tell segment. Anybody who brings something gets a ticket, a winner is drawn, and a Rockler's gift certificate is yours. It encourages people to bring things in. I've walked away with the ticket three or four times, and I'll tell you that the $30 or $40 bucks has been a great help to me in outfitting my humble little shop!

Re: Help with a club challenge idea

#15

What's a film cannister? :)

John Lucas

>

Re: Help with a club challenge idea

#16

Re: femisphere URL here.

Don Tewell

>Thanks. They look really cool, will have to try one next week.

Re: Help with a club challenge idea

#17

Re: What's a film cannister? :)

RK in Milw

>A film cannister is an artifact from the dark ages of photography. I have a few in a display cabinet with other photo antiquities. I also have some flash powder and a flash powder pan with a flint trigger mechanism. My 90 year old building was originally a photo studio and I found the flash powder and pan in a cubby hole in the attic. Got flash bulbs and glass plates too.

Cheers - Ron

Re: Help with a club challenge idea

#18

Re: Help with a club challenge idea

John Uteck - Charlotte, NC

>All good responses so far. I'd suggest to look at some of the AAW Chapter websites and club newsletters to see what challenges they have listed. One thing suggested in our club was to give as much advance notice as possible to give everyone enough time to turn something - especially if it required green/rough turning, then dry time before finish turning.

Re: Help with a club challenge idea

#19

Re: Help with a club challenge idea

Bob Lemon, Sacramento CA

>The most free rings on a 6" long spindle.

The tallest standing structure on a maximum 6" base.

Turned and embellished object, any size.

Trebuchet, maximum arm length 12".

Egg turning contest. Lots of fun - use your imagination.

A turned fish. (Contest after a demo)

Inside out turning.

Turned beads on a string.

This is just a few ideas. Our contests are now broken up into 3 skill levels - beginning intermediate, and advanced. Many more participate now.

Re: Help with a club challenge idea

#20

Re: Help with a club challenge idea

David Breth

>Those sound like fun. I can just picture about forty lathe jockeys standing around wondering whose tallest structure will go down first.