WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

An Introduction / First turning

Posts

An Introduction / First turning

#1

An Introduction / First turning

Dave Belser

>I've been lurking here for a while and responded to a few posts - so it's about time I introduced myself.

My name is David Belser and I'm a turn-a-oholic. It all started innocently enough when a friend gave me an old Delta-Rockwell lathe. It started Christmas 2004 when I turned 27 tops for presents. I thought I could control my habit but it's only gotten worse in the past year. I find that I can't pass a downed tree without stopping and my tablesaw is buried in a mountain of roughed out chips.

What a great support group this is!

The other night I was reflecting on my habit and realized that I still had my first turning. It's a black king chess piece and is about 16" tall. If it looks like a IA shop project thats because it is. I did it about 30 years ago in eighth grade. I haven't turned anything else until I got started a little over a year ago. I don't remember much about making it - as far as what gouges the instructor let me use. I spent many weeks on it and may have actually sanded it into shape :)

Dave from NH

Re: An Introduction / First turning

#2

actual  this time

Dave Belser

>Opps.


img

Re: An Introduction / First turning

#3

Re: actual this time

GaryG in MD

>Welcome Dave,

I'm an unrepentant turnaholic too. You're definitely in the right place to help support your habit.

A 16" king! Man, I'd like to see the chess board!

Happy and safe turning,

Gary

Re: An Introduction / First turning

#4

Dick Hines

Re: An Introduction / First turning

Dick Hines

>Good news Dave! It will only get worse. Have fun.

Re: An Introduction / First turning

#5

Re: An Introduction / First turning

George Van in WI

>Welcome Dave,Gary and Dave are correct.

To me I am trying to understand anything in your behavior that is abnormal. My wife accuses me of "denial", I do not know what she means?????

Re: An Introduction / First turning

#6

Keith Tompkins

Re: An Introduction / First turning

Keith Tompkins

>Nice first turning Dave! Welcome to the addiction!

Re: An Introduction / First turning

#7

Re: An Introduction / First turning

Steve in NC

>Welcome Dave

If you are worried about your addiction I suggest you stay away from bowls. That's what did me in.

Re: An Introduction / First turning

#8

Too Late!

Dave Belser

>I already have 50+ half turned blanks drying in the basement, I 5' dia 7' tall hollow oak trunk in the yard, 6 good sized chunks of big leaf maple and a pile of apple checking and splitting as we speak.

Dave

Re: An Introduction / First turning

#9

Re: Too Late!

Steve in NC

>Yup, you got it good. Best find a support group pretty quickly.

Re: An Introduction / First turning

#10

Re: Too Late!

Don O.

>Welcome to the addiction. Now take 12 steps............toward your lathe and keep the chips flying!

Re: An Introduction / First turning

#11

Brad Vietje

Re: An Introduction / First turning

Brad Vietje

>Howdy, Dave,

What part of New Hampshire ? I hope you know about the Guild of NH Woodworkers, and the Granite State Woodturners. If not (or even if so) the GSW will be meeting at Pinkerton Academy on Saturday, 3/25 from about 9 AM to Noon. I'll be doing a short demo on hollowing end grain, and another turner will be demonstrating turning hollow forms with a laser-guided stabilized boring bar.

The Granite State Woodturners meets the 4th Saturday of odd-numbered months, and the location changes -- usually in the southern part of the state, except the annual critique meeting, which is held just outside of Hanover.

We also put on a great symposium every 3 years, which comes up this May 13th. (Info at www.gnhw.org) Hope to see you at one of these turning events !

Safe Spinning,

Brad Vietje

Newbury, VT (across from Haverhill/Woodsville)