Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

mini screwdriver for my son

Posts

mini screwdriver for my son

#1

mini screwdriver for my son

john lucas

>I made this from a piece of spring steel rod, a piece of aluminum arrow shaft for a ferrul and some corian. the shaft was turned down to size on my small metal lathe. Then I ground the tip and heat treated it.


img

Re: mini screwdriver for my son

#2

Re: mini screwdriver for my son

Don Henthorn

>That is a keeper, John. I'll bet he will treasure that for his lifetime.

Re: mini screwdriver for my son

#3

Re: mini screwdriver for my son

Bill Crommett

>John: I like the form, and the finish is great, but you could stand some work on your photography. The dark tip on a black background doesn't give enough contrast for good visibility.

Re: mini screwdriver for my son

#4

Re: mini screwdriver for my son

RK in Milw

>Hey John, I used to play Bass Clarinet. Seems to me the handle should be ebony to make the nsturment ;)

Really, great job from a great Dad.

Ron

Re: mini screwdriver for my son

#5

Leo Van Der Loo

Re: mini screwdriver for my son

Leo Van Der Loo

>Looks good John, you could polish the blueing off and if the screw driver was for me I'd like to have some grip, like some flutes milled in the handle, just a thought.

Have fun and take care

Leo Van Der Loo

Re: mini screwdriver for my son

#6

Re: mini screwdriver for my son

john lucas

>Bill We shot that just before my son left so the stove top was the only thing around that wasn't cluttered. We did work to get the tip to shine a little. I'll blame the photography on him. Actually he missed the focus a hair and I had to sharpen it on the computer. Hey at 16 I'm lucky to get him to do anything that isn't attached to a computer.

Re: mini screwdriver for my son

#7

Re: mini screwdriver for my son

john lucas

>Ron I dug around the shop and didn't have and ebony or blackwood. Bummer. I thought about dying some wood but I only had a short time before he left so I used the corian.

Re: mini screwdriver for my son

#8

Re: mini screwdriver for my son

john lucas

>Leo I usually polish the blueing off but my son likes to play with heat treating so I left the evidence. On a screwdriver of this size you don't want much torque, you can strip out the head. I spent too many years repairing camera's and found this out the hardway. You need downward pressure. I made the shaft that long because some of the screws are hard to reach. By making a longer shaft you get the handle clear of the clarinet body.

Re: mini screwdriver for my son

#9

Re: mini screwdriver for my son

bob davis

>beautiful!