Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Jet mini Tailstock fix

Posts

Jet mini Tailstock fix

#1

Jet mini Tailstock fix

john lucas

>One of the problems with the jet mini is the tailstock slips. To get around this I made a bigger tailstock locking plate. I screwed a 1 �� x 1/8� x 4� long piece of mild steel to a 2� X �� x4� piece of mild still. Then I drilled a hole �� in diameter for the locking screw.

To keep the plate from rotating and to make it easier to get on and off I drilled a 1/8� hole in the tailstock and inserted a roll pin. I put a spring on this to keep the locking plate �open�. This makes it easier slide the tailstock on and off.

Before I screwed the 1/8� piece to the big piece I draw filed the large piece to flatten it and remove the scale. If you bought metal that was cold rolled it wouldn�t have this scale but you still need to check to see if the metal is flat. It�s the size and the flatness that makes it work as a locking plate. Mine isn�t perfect, it slips when you apply a lot of pressure but it�s sure better than the smaller plate. If you wanted one that really works take a piece of 3/8� metal and have it machined so there is a 1 �� raised strip. This will be flat and will lock more securely.


img

Re: Jet mini Tailstock fix

#2

locking plate positioning pin 

john lucas

>


img

Re: Jet mini Tailstock fix

#3

Locking plate in postion 

john lucas

>


img

Re: Jet mini Tailstock fix

#4

Re: Jet mini Tailstock fix

Barry Turner

>John, you oughta market that "fix". That's one of the few problems I have encountered with my Jet Mini. Since I seldom turn large stock on it now that I have another lathe, it's not much of a problem for me anymore. Well-engineered fix though.

Re: Jet mini Tailstock fix

#5

Re: Jet mini Tailstock fix

Jerry Whitaker

>I bought one from a guy that Mills these things and sells them for about $12 and it works real well. Then I took it to a machine shop to see how much they would charge me to make them and they estimated that the first one would cost $55 and then, once the milling machine was set up, they estimated they could make 3 per hour which would be $20 ea. once the tax was added. John, I believe most anyone could make one like yours and it looks better anyway. I like the roll pin and spring idea. The one I bought is barely rectangular, almost a square and makes the tailstock a booger to put back on sometimes.

Re: Jet mini Tailstock fix

#6

Thanks for the idea, John.

Don Henthorn

>That is something I can do with a hacksaw and files and a hand drill.

Re: Jet mini Tailstock fix

#7

Re: Jet mini Tailstock fix

Phil Joines Krum,Tx

>Good idea John.

BTW I use the 6x48 belt sander and 100 grit Klingspore belts to remove mill scale and rough shape tools.

Our club made a bunch of small hollowing tools Saturday. I found that the HF air cutoff tool with two disks mounted at the same time was the fastest tool for rough shaping. Next was the belt sander then the 80 grit wheel on an 8" slow speed grinder.

Re: Jet mini Tailstock fix

#8

Re: Locking plate in postion

Bill Crommett

>John: Glad to see that you are doing better.:)

Re: Jet mini Tailstock fix

#9

Leo Van Der Loo

Delta mini Tailstock fix

Leo Van Der Loo

>I fixed the Delta tail stock in a similar way, just a straight 1/4" plate 2"W and 2 1/2"L that fits right in there, and a spring on the bolt to open it up, but I do have to line up the locking plate when sliding the tail stock on, I also glued a brass shimming strip on to take the side to side slack out, something like 15 thou.

works like a dream

Have fun and take care

Leo Van Der Loo


img

Re: Jet mini Tailstock fix

#10

Leo Van Der Loo

Re: Delta mini Tailstock fix

Leo Van Der Loo

>another look


img

Re: Jet mini Tailstock fix

#11

Re: Jet mini Tailstock fix

john lucas

>Phil is that faster than an angle grinder with grinding wheel. It always takes me forever to grind away large amounts of steel or to clean up my terrible welds.

Re: Jet mini Tailstock fix

#12

Re: Delta mini Tailstock fix

john lucas

>Leo I thought this would be adaptable to many lathes. I got the idea after seeing Robert Vaughan do a demo on lathe and bandsaw tune up. I also got a tip from someone on doing this to a full size General lathe. Wish I could remember who. I'd have to go through my big stack of American Woodturner to find it.

Re: Jet mini Tailstock fix

#13

Re: Jet mini Tailstock fix

Phil Joines Krum,Tx

>John,

It' slower that an angle grinder but leaves a much better surface. I use an angle grinder for welds too.