English Walnut HF
Doug
>6" D X 4" H. Wall thickness 3/16. Foot 1 3/4". Finish Watco DO.
Still working on the photo thing.
Critiques always appreciated.
Knowledge You Can Build On — Est. 1998
English Walnut HF
Doug
>6" D X 4" H. Wall thickness 3/16. Foot 1 3/4". Finish Watco DO.
Still working on the photo thing.
Critiques always appreciated.
Ooooooo...!
Jennifer@Indy.USA
>That's very pretty Doug.
One of my favorite woods. I like the simple detail at the rim. Very nice plump, juicy form.
Nice job!
Jennifer
Re: I'd be happy to have turned this. I like it.
Al Crandall (NE of Indy)
>
Re: Ooooooo...!
Doug
>Thanks Jennifer. This was from a tree friends took down in their yard. I made this and gave it to them.
Doug
Re: Ooooooo...!
Chris K in MD
>They must be very happy its beautiful!
very nice job Doug
Leo Van Der Loo
>
Perfectly lovely.
GaryG in MD
>
Re: English Walnut HF
George Van in WI
>Nice form Doug, your neighbor will be tickled! That is a hard form for me to get right, the grain flows comfortably around the form. The finish fits well. I think this form could do well without a foot also. Thanks for posting.
Re: English Walnut HF
Bill MacLachlan
>Great looking piece Doug. I also like the way the grain wraps around the piece.
Sweet!
Carole Valentine
>Love this Doug...form, finsh, wood, details! It's going to make someone very happy. Nice work!
Re: English Walnut HF
john lucas
>Doug, you done good there boy. Proper english doesn't matter when your speechless. The shape is really good, I love the lip detail and it has a very natural looking finish. As Al said I would love to make a piece than nice. Of course the inside that we can't see is probably poorly turned and not sanded, yea right, it's probably smoother than a baby's but.
The photography is excellent. Showing just a little of the foot so you know it's there, you can still see the lip detail. The lights are good with one being higher than the other and also brighter which gives roundness to the shape.
Just to be picky I would move the right hand light up and back a little. It should probably be just a hair brighter. By moving the light up and back you will create a little more shaping to make the piece more 3 dimensional.
There are 2 ways to make a light brighter. Move it closer or increase the exposure on the camera. Moving it closer usually make the hotspot look worse because you aren't illuminating as much of the panel so increasing the exposure is better. This of course brightens the left side as well,to compensate move the left light further away. You don't have to move it far.
The way you have the lights now shows that you are learning and doing things right. One light higher than the other always looks more natural and you have one light brighter than the other.
If you put a piece of cloth between the left light and the panel it might smooth out the shiny dot that shows where the light is and then you won't have the double dots you have now. This might also take care of the exposure problem when you increase the exposure in the camera because putting another piece of cloth between the light will decrease the light on that side. If cloth is too dense or removing too much light use 2 to 4 pieces of wire screen. It works realy well and is flame proof. Sometimes I will just tape some pieces of screen 5" square to the panel exactly between the light and the piece. This diffuses the white dot so the left side would appear evenly lit. Then you can move the light closer or further away to get the right exposure.
Hope that helps.
Hope that makes sense, if not feel free to write.
Re: English Walnut HF
georgetroy
>Very good Doug, just a nice sweet shape. GT
Re: English Walnut HF
Mike Schwing from Md.
>That is a BEAUTIFUL form. I believe anyone would be proud to put their signature on that one, and you should be, too.
Re: English Walnut HF
Don O.
>Sweet! Graceful, lovely.
A classic!
Adrien
>
Thanks - longish
Doug
>Thank you all for the kind comments. I am very humble about my turnings and almost always feel they could be better and as a result I have never attempted to sell anything. In our local club we have so many talented artists - and I am not artistic - that it is somewhat intimidating to place your work along side of real works of art. Since I do not posses enough artistic talent to carve, burn, texture, color, etc. I strive for simple pleasing curves. I worked hard on this piece and the result is that it feels really good to hold. How it feels in my hands is the test for me. I once held a simple bowl made by Bill Luce and was blown away by the beauty and feel of this simple form. I didn't want to set it down.
Thanks again --- Doug
Re: Thanks - longish
Keith Tompkins
>Doug, all the embellishments in the world won't improve a piece if the form is poor. Your form is very, very good. To me, getting the form right is the most important consideration...all else is secondary. Nice work!
Very, very nice!
Gerald Mc Grantham - Southern NJ
>
Re: English Walnut HF
Jim Shaver - Oakville, Ontario
>Hi Doug,
A wonderful flowing curve....part of me is okay with the collar, another part of me wanted to see it not there...
Take care,
Jim
Re: English Walnut HF
Chip Sutherland
>That is wonderful. The form is so gentle yet full. The subtle detail on top enhances the gentle lines. Did it take long to find this shape? I'm still a bit heavy handed and tend to get more taper than roundness. But, I've got to try my hand at this type of form. I've got a piece of asian padauk that has a similar grain wave patter but is a Georgia red clay color.
Chip
Doug
>The shape is just something one creates each time. I don't know as I could repeat it exactly. I simply strive for a free flowing line with nothing interrupting the feel of the flow-if that makes sense. My eyes are always on the top of the form constantly observing the overall flow as well as eliminating the slightest flattening of the curve. The secret is that the curve must be constant even though it is ever changing in degree. I think it is referred to as a 'Fair Curve'.
Thanks for looking -- Doug
Re: English Walnut HF
Scott Greaves in Blackfoot Idaho
>Hi Doug,
I think you nailed this one! That is a beautiful piece!
Scott.