Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

First Vase shape vessel.

Posts

First Vase shape vessel.

#1

First Vase shape vessel.

kevinT in T Bay

>218pcs of Birch and reclaimed walnut from the scrap drawers.. 4"base 8 1/2" at the widest point and the opening is approx5". It stands 12 1/2" tall. Comments welcomed.... Again!!!! am I getting close with the " Form / shapes????" Thanks KevinT in T Bay


img

Re: First Vase shape vessel.

#2

Re: First Vase shape vessel.

georgetroy

>Looking good Kevin, that is a pretty tall vase. Good use of material. Maybe a 3" bottom or so. GT

Re: First Vase shape vessel.

#3

Re: First Vase shape vessel.

Jennifer@Indy.USA

>Kevin,

I think the form looks great...however I am going to agree with George that a tad bit smaller base might work a little better. Then again, if this were glass and going to filled with water and flowers....this size base would be perfect. It's all so confusing :)

Very nice job. I applaud your patience with the segments. I admire this type of work a great deal, but could never see myself disciplined enough to cut the precise pieces to make one.

Jennifer

Re: First Vase shape vessel.

#4

Re: First Vase shape vessel.

kevinT in T Bay

>Thanks G.Smaller base. I see what you are refering to... Increase the tapper,without lossing the widest point?

Re: First Vase shape vessel.

#5

Re: First Vase shape vessel.

kevinT in T Bay

>Jennifer,

The cutting is nothing...For me the "Form" thing is driving me up the wall,onto the ceiling and down the other wall.

I think the same about waiting to turn something that has to go for a bath in alcohol, drip dry, and soak in other stuff, before it even kisses the lathe.

I guess each has its' pros and cons. Thanks Kevin Turner in Thunder Bay

Re: First Vase shape vessel.

#6

Leo Van Der Loo

Re: First Vase shape vessel. *LINK*

Leo Van Der Loo

>Hi Kevin my first impression was nice, but the bottom should be tucked in a bit, still the vase is very nice.

Kevin I have a son living in Atikokan and he has seen your turnings he thought, when he was still living in Thunderbay.

Where about do you live, east or west of TBay, on the Trans Canada, orrr ??

I will be up there once in a while and could drag some blanks up to TBay if you are interested, you can Email me privately if you like.

Any preferences I can lay my hands on ??

Have fun and take care

Leo Van Der Loo


http://homepage.mac.com/l.vanderloo/PhotoAlbum26.html

Re: First Vase shape vessel.

#7

Re: First Vase shape vessel.

George Van in WI

>Hi Kevin, you are making great progress! Like Jennifer, I do not think I would have the patience to make segmented pieces. Heck, I have a hard time with a glue block. As Wally and others suggest try taking the object off the lathe and look at it upside down when cutting the profile. I take the form and chuck off together while roughing so I do not loose alignment. If you are ever down to Duluth, the group meets the 2nd Wednesday of the month.


img

Re: First Vase shape vessel.

#8

Re: First Vase shape vessel.

Tom in Red Deer

>Looking good Kevin. Your progress is very noticeable. Keep up the good work.

Tom

Re: First Vase shape vessel.

#9

Re: First Vase shape vessel. *LINK*

Stuart Johnson

>Kevin, Very nice and I know what you mean about form. You might try Lloyd Johnson's Woodturner Pro for layout and 3D Design for form design. The 3D Design comes with something over 100 design / profiles that range from goblets to vases.


Woodturner Pro

Re: First Vase shape vessel.

#10

Re: First Vase shape vessel.

Don O.

>Kevin, very nice work overall. I don't have the patience right now to do this type of work myself, so I also respect those who do. The simple fact you are concerned about good form and working hard to achieve it is most of the battle here. I will agree that the upper 2/3 of the vase is outstanding, but letting the curve flow all the way to the bottom may help you figure out how big the base should be. We all have to start somewhere and you are way off to a great start! The glue joints, alignment, pattern, finish are all wonderful. Can't wait to see the next one!

Re: First Vase shape vessel.

#11

Impressive, Leo!

Ruth Niles

>Leo,

Your work, quality and amount, is quite impressive. I just bought a house and there's a small (used to be kids play house) building and it would make a perfect "drying shed" like you have. I think you should put up a separate post about how and what you did to make the drying area. Or, if you already did that and I missed it (!) perhaps just send me an email and tell me what I need to do.

Thanks

Re: First Vase shape vessel.

#12

Re: First Vase shape vessel.

Ruth Niles

>This is really nice for your "first vase shape". I have the "Designer Pro" that Stuart mentioned and it really is an excellent program. I think you can buy it from our own Mark Kauder.

Re: First Vase shape vessel.

#13

Re: First Vase shape vessel.

Jim Shaver - Oakville, Ontario

>Hi Kevin,

Your work is constantly improving! I am really enjoying watching you grow in this process....there are some really talented segmented turners here who Iam sure will offer you some advice should you ever need it, but you are quickly becoming very good at this..

Keep it up and share your work!!

Take care,

Jim

Re: First Vase shape vessel.

#14

Leo Van Der Loo

Re: Impressive, Leo!

Leo Van Der Loo

>Hi Ruth

Nice to hear from you again, and you are flattering me again, thank you, We need that once in a while :))

Happy to hear you have your own place again, congratulations, we all need to have "our own" place, just like the kids with their play house.

Knowing myself it would probably a long rambling to try telling the why what and how of my "Drying Chalet"

I will send you a Email with the way I did it and how and why.

Have fun and take good care

Leo Van Der Loo