Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

anyone want this turning job?

Posts

anyone want this turning job?

#1

anyone want this turning job?

T Daniel

>I have an order for 2 4" diameter post about 60" long. I can make them in two pieces but it would be better if they were in one. Type wood does not matter as they will be painted. They can be hollow. These are straigt mantel posts, no decorative cuts at all.

Price including shipping to GA must be under $120. Anyone want the job? email me if you do. Delivery must be in 2 weeks or less.

TD

Re: anyone want this turning job?

#2

Re: anyone want this turning job?

Jennifer@Indy.USA

>They're not asking for much are they :)

I'll pass....but thanks for asking!

Jen :)

Re: anyone want this turning job?

#3

Re: anyone want this turning job?

Barry Turner

>Hmmmmmmm.........good luck on that one. What with the costs of materials and shipping to GA, even a very fast turner would be danged lucky to make a couple of bucks on this job. Like I said......Good Luck! You're gonna need lot of it.

Re: anyone want this turning job?

#4

Re: anyone want this turning job?

William Duffield, on the Cohansey

>Why even use wood, if they will be painted? For that price and absurdly short short deadline, all they deserve is PVC pipe.

Re: anyone want this turning job?

#5

Re: anyone want this turning job?

JanManuel

>Well.....doing 2 posts like that in 2 weeks isn't a challenge....but, I'd price them at $150 each, plus shipping......to do both for $120....they are fooling themselves to think anyone would do them....

I can do a 60" spindle in one length. A 4"x4" post would be glued from 8/4 lumber. Since it's paint grade, i'd use poplar.

Re: anyone want this turning job?

#6

just a dowel

T Daniel

>Jan, this is nothing but a big dowel; it can be hollow and poplar would be fine. What do you think?

TD