Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Red Alder

Posts

Red Alder

#1

Red Alder

Rick Davenport

>Just snagged a few free hunks of red alder from a city park cleaning crew.

Four to six feet long with a diameter ranging from 6 to 12 inches. The ends are now sealed.

I googled red alder and found that it's fairly soft and "okay" for turning.

Any suggestions/tricks on how to treat it?

What the heck, even if it's not that good, I'll still get the needed turning time practice.

And the price was right.

Thanks in advance,

Rick (doesn't this guy ever shut up?) Davenport

Re: Red Alder

#2

Re: Red Alder

tek-Brunswick, Ohio

>For bowls cutthe logs 4" or 6" longer than their diameter. Then cut them lengthwise Through the center of the growth rings (the Pith) and seal the ends. That should keep them until you cut the half logs into disks to put on the lathe. I haven't turned any Red Alder. I heard it turns decently though. Hopefully someone who knows more will jump in.

Tom

Re: Red Alder

#3

Roger Dunn

Re: Red Alder

Roger Dunn

>Rick,

Since the trees were recently cut, the bark should stay on nicely for a natural edged bowl. When turned fresh, the bowl will be a rich cream color. Soak it overnight in Denatured alcohol, bag per Dave Smith's guidelines and it will be ready to finish turn, sand and finish in a month. If you plan to wait to turn it, coat the ends with anchorseal and store out of direct sunlight, After a month's wait, the wood will take on a rich brownish color and if left by itself for a few months, it will be spalting with beautiful whitish streaks and black lines through the then golden colored wood. It is a stable wood and makes nice turnings. It is soft compared to other hardwoods. The grain is generally plain but try to include a crotch or branch to get additional figure and pattern. It is very common in the Pacific Northwest but easy to work and it finishes nicely.

good luck with it

Roger Dunn

Re: Red Alder

#4

Re: Red Alder

Rick Davenport

>Thanks Tek and Roger.

I've anchorsealed the ends and they are resting on the concrete floor of my garage/shop.

After all the cracked, dried and musky firewood I've turned recently, playing with the Alder ought to be fun.

Rick