Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

I need help

Posts

I need help

#1

I need help

T Daniel

>In order to make the "Gathering" a total success I need help. Give me an idea of what you want the demos to be on. I want to include all groups, beginner to advanced. I need to know who is coming, what level they are at, what they would like to learn, etc. so that I can gear the demos to the needs. Don't be bashful folks, this thing is for you but I need to know what you need to know.

TD

Re: I need help

#2

JL

Re: I need help

JL

>I am an intermediate to beginner turner. Spindles I don't have much trouble with. Bowls, goblets, plates, platters, hollowforms would all work for me. Segmented work would also be a nice thing.

Other things I would like to see demos on are:

Molly Winton - pyrography

John Lucas - photography and lighting

Re: I need help

#3

Re: I need help

john lucas

>Terry I am coming and I can demo just about anything if I know in advace. Of course inside-out turning and skew use are my strong points as well as turning ornaments and hand mirrors. I would be glad to do a photo demo or set up a booth and help people with thier photography.

Re: I need help

#4

Gosh, TD...everything!

Carole Valentine

>Don't know what level I would be. Been turning for just over a year...beginner to intermediate and never had a lesson other than basic bowl at Woodcraft so I am sure I am doing a LOT of things wrong. The thing I really have the most trouble with right now is seeing a piece in an odd shaped hunk of wood like a burl and figuring out how to cut it and mount it. Couple of other things - cutting small beads, making boxes and lidded vessels, platters.

Re: I need help

#5

Re: I need help

Jennifer@Indy.USA

>I would love to see.....

1.)skew demos with followup hands on skew instruction. Basic/intermediate level.

2.)push cut bowl gouge demonstration

3.)hollowing

4.)cutting blanks from a log. Possible orientation choices and their results.

5.)how about a chainsaw sharpening demo? I could certainly use a refresher.

thats a start : )

Jen

Re: I need help

#6

Re: I need help

Mark Kauder, Phenix City, AL

>TD,

Depending on things you know, I hope to be there wed and thur. I can help with most anything.

If you have someplace I can project, I can do either my 1.5 hour demo or my 3 plus hour demo - good practice for SSS on Saturday. Segmenting start to finish - of course.

Mark

Re: I need help

#7

Re: I need help

Lan Brady

>TD,

I hope to be there on Wednesday and Thursday. I will help with any grunt work that I can.

demos that I would benefit from are:

1. how to make tools, mostly hollowing

2. Wet sanding. my # 1 need.

3. finishing for chatoyance

4. dying wood for highlights

5. using a scraper

Thanks for asking, Lan

Re: I need help

#8

Re: I need help

Jim Shaver - Oakville, Ontario

>Hmmmmm......

I don't see any pen topics yet.....hmmmmmmm

:-)

Take care,

Jim

Re: I need help

#9

Re: I need help

Jennifer@Indy.USA

>..how to write a letter with a pen instead of a computer?

;)

Re: I need help

#10

JL

Re: So, when are you going to get here?

JL

>

Re: I need help

#11

Re: I need help

George Van in WI

>TD, I hope to be there, I am waiting for a few appointments with the cardiologist before I know if I can. I sure will feel bad if I have to miss it. If I can go I will I will definitely let you know and arrive early enough to help out and will check to see what�s needed that I can bring.

Some things of extra interest, I never saw a demo that didn�t teach me a lot!

1) Hollowing and sharpening and making hollowing tools and tips.

2) As Carol said, seeing a piece in an odd shaped hunk of wood like a burl and figuring out how to cut it.

3) Dying wood for highlights

4) Design

5) Sharpening tricks and ideas.

6) Details and texturing

7) Collars and Finials

Thanks, George

Re: I need help

#12

got you covered...

T Daniel

>I hope all goes well and you can make it George. I'll ask John Lucas to give a demo on finials, I think we have the rest covered already. Thanks for the ideas.

TD

Re: I need help

#13

Re: I need help

Jorge Castaneda

>Td,

I am an advanced intermediate, advanced here does not in refence to level of skill but age, confortable making boxes and bowls, same with spindles, want to get proficient at hollowing, also at segmented turning. I have some skill making tools, and sharpening. Also a photographer.

Re: I need help

#14

Re: I need help

Ruth Niles

>I agree with Jen on two demos I'd like to attend:

1. Cutting blanks from logs with grain orientation. I do have John Jordan's newest video which deals almost exclusively with this however seeing it in person is better for my retention abilities.

2. Sharpening chainsaws. I do it but am sure I could learn more.

Re: I need help

#15

Re: I need help

Ed Karch

>Intermediate to advanced.

I can do: tool making, SW forms, wood ID, general gofer.

I need: Marketing, large bowls, finishing, all the rest of the interesting stuff.

Re: I need help

#16

Re: got you covered...

Mac

>Jorge is the man for photos TD,he does ours at the club,talk him into doing a set for the demos.Tell him not to wear his safari shorts tho,drives the girls wild.....