Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Live Center?

Posts

Live Center?

#1

Live Center?

Brian in Brighton

>I am new to turning and want to replace my Delta dead cup center with a live center to help reduce burning. What live centers should I avoid? Should I look for a cup center, like the Sorby, or is a std point OK? Will a Jet brand fit into my #2MT tail stock? I would hate to order another brand and find out it's too long or something.

I want to concentrate on spindle turning. Maybe someday I'll deal with other things, but for now it's furniture legs and finials.

Any advice would be appreciated.

Brian in Brighton

Re: Live Center?

#2

Re: Live Center?

Lan Brady

>Brian,

you can find them available from 10 to 100 dollars. Sears, WoodCraft, Packards, Craft Supply or Harbor Freight. Just pick your prefered shape and price point. You will end buying several anyhow before it is over!

Lan

Re: Live Center?

#3

Don't toss ths cup center

Phil Joines Krum,Tx

>Use it in place of the spur drive. If you haven't tried it you'll be suprised how well it works.

Re: Live Center?

#5

JL

Re: Live Center? *LINK*

JL

>Brian - there are many good live centers out there. Oneway makes some very good ones as does Sorby. Sorby also makes a live center version of their Stebcentre (revolving steb centre). That is next on my list to buy. Just about any #2 MT should fit on your lathe.


Woodcraft Steb Centres

Re: Live Center?

#6

Re: Live Center?

john lucas

>Brian I am very fond of the Nova live center. It's very easy to replace the points. You can also knock out the pin in the cup center. I find this especially useful for turning wine stoppers for the initial roughing out. The repaceable centers use a short #2 morse taper so it's easy to make your own tips when you need an odd size.

I've had this thing for over 10 years and still haven't had to replace the bearings.

Re: Live Center?

#7

Re: Live Center?

Brian Hahn in SW Wisconsin

>I second John's recommendation for the Nova live center. I've had one for ten years now. It's hard to beat the versatility of the short #2 Morse taper they use for the inserts. It lets you make all sorts of specialized tips -- big cones, small cones, cups in whatever size you need. And best of all, you can make the tips out of wood so they don't destroy your tool when you accidentally try to turn the live center.

When my Nova live center finally dies, I'll replace it with another Nova. No questions or second thoughts about that!!

Re: Live Center?

#8

Re: Live Center?

John Lucas

>Brian I have even used them in my drive spindle occasionally when I need to drive something really delicate or very unusual.

Re: Live Center?

#9

Re: Live Center?

Bill Howatt

>I have the Oneway. Like a lot of others you can knock the point out and use it as a live cup center. I like its accessories. Since I do vacuum chucking of bowls I have the Oneway adapter that threads on the live center's thread allowing me to screw my Oneway chuck onto the center for accurate centering on the vac chuck.

The Oneway and some others are designed so most of the outer surface of the center doesn't rotate. Just a nice feature when you are working close to the center - may not be such a big deal for spindles.

I also agree with using the old dead center in the spindle for "safety driving" your spindles when necessary. Works quite well.

Re: Live Center?

#10

Re: Live Center?

Brian Hahn in SW Wisconsin

>John, I've done the same thing now that I have a Jet mini. My main lathe has a #3 Morse taper in the headstock and I've made custom drive centers from wood for it. The best way to turn a sphere seems to be with cup drive and live centers custom made from wood. And it doesn't take very long to make them.

Re: Live Center?

#11

Re: Live Center?

Rick Allen

>The Oneway live center and the Oneway "safety drive" (dead cup center) have the same profile. You can flip your spindle end for end and expect the spindle to run true.

That said, I prefer the Axminister multi-tip live center. I like the body of the live center to spin. I can judge how much presure I am applying with the live center by touching the spinning body of the live center.

Good Luck with your choice.

Re: Live Center?

#12

Re: Live Center?

John Lucas

>Brian I've done the same thing. The jet mini has a #2 morse taper in the headstock however. I guess I need to do a tutorial on making wooden morse tapers to put on this site. There seems to be some interest.

Re: Live Center?

#13

Sounds like a good idea

Brian Hahn in SW Wisconsin

>

Re: Live Center?

#14

That's a good point

Brian Hahn in SW Wisconsin

>I also watch the spinning body of the live center to check that things haven't loosened up. I usually notice the live center isn't spinning fast enough long before I can detect the problem in the piece I'm turning. It gives me a chance to snug things up before the turning gets out of whack.

Re: Live Center?

#15

Re: Don't toss ths cup center

Russell L. Babbitt Jr.

>I agree with Phil. Save you dead center. Oneway sells them as "safety centers". Using them as a drive center will reduce violent catches when spindle turning. If you do get a catch the wood will spin on the center instead of the tools digging in. Friction between the wood and the dead center is the driving force.

Re: Live Center?

#16

Re: That's a good point

Bill Howatt

>There is plenty of rotating shaft to see on a "fixed" body center to handle this desire. It's just smaller diameter and less obtrusive, IMO.

Bill

Re: Live Center?

#17

So much information!!

Brian in Brighton

>Thanks everyone. I went to Rockler and ended up getting a Jet for now. I like the Sorby, but think I should get a little better at turning before coughing up the extra $$$ in case I whack it with the tool. Lot's of good info, as always on WC.

Brian in Brighton.