Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Threading jig

Posts

Threading jig

#1

Threading jig

onewaywood

>Does anyone know of a threading jig besides Bonnie Klien's........... web sites, anything?

Re: Threading jig

#2

Re: Threading jig *LINK*

Charles Bjorgen

>One other option is the Baxter's Thread Master available from Bestwood Tools.


Baxter's Thread Master

Re: Threading jig

#3

Re: Threading jig

JKJ in East TN

>I bought the Baxter and is is well made.

JKJ

Re: Threading jig

#4

Re: My Threading jig is on the club's web site.

Al Crandall (NE of Indy)

>Go to http://www.cicaaw.org/image/tid/105?from=0

You will find 7 pictures of a jig which I built. It has a cutter powered by a dedicated router. Click on the thumbnails and I have written a brief description of what is being shown in each picture. It ought to give you a idea or two so you can design your own.

Re: Threading jig

#5

Re: My Threading jig is on the club's web site.

RussFairfield

>Great threading jig, AL. This one has the ability to turn big threads in big wood. The router RPM will give a smoother surface that anything we can get out of a lathe spindle. And, I like the idea of a spring loaded nut ro take out the backlash in the threads.

Where do you get your cutters, or did I miss that??

Re: Threading jig

#6

Russ......

T Daniel

>What are you doing up so early? It isn't even daylight yet!

TD

Re: Threading jig

#7

Re: My Threading jig is on the club's web site.

Ed Moore

>Al,

Good job! I have the Best Wood Tools jig and I like its precision. I suspect that your jig can do very well also. If one wants to use a router instead of the lathe, I guess that we could build a device similar to parts of your jig to support the router. Hmmmm.

Ed

Re: Threading jig

#8

Re: Cutter is from McMaster-Carr or possibly Enco.

Al Crandall (NE of Indy)

>

Re: Threading jig

#9

Re: This is second edition. First was lathe based.

Al Crandall (NE of Indy)

>I built two lathe-based jigs first. One of them I donated to the club to be raffled off for a money raising project. I still have the parts for the second one, but I didn't like having the mini lathe tied up while I was threading so I sought an alternate power source. Like Russ says, the extra rpm cuts cleaner. Ask Keith Thompson about the threads this produces. It also allows me to thread taller (longer?) pieces than the mini based jig. Think funerary urns.

Re: Threading jig

#10

Re: This is second edition. First was lathe based.

Ed Moore

>I understand what you mean about having a lathe tied up with the threading jig.

I made a nice little threaded urn for a Yorkshire Terrior. And I think there could be a very profitable business making pet urns, but it isn't for me. And there is obviously a need for larger urns.

Ed

Re: Threading jig

#12

Re: Cutter is from McMaster-Carr or possibly Enco.

Ed Moore

>Russ,

The 3/4" cutter is 367-7100 at Enco. It's the one that comes with the jigs.

Ed

Re: Threading jig

#13

Re: My Threading jig is on the club's web site.

John Lucas

>Al Very good jig. I've been looking at these things both homemade and storebought for years. I think I like yours the best. I have 3 routers that don't get much use any more, might as well put one of them to use.

Re: Threading jig

#14

Keith Tompkins

Re: This is second edition. First was lathe based.

Keith Tompkins

>Al, you are correct...the quality of the threads produced by your jig is outstanding! during my visit to Indy I checked out some samples of Al's threading work...I must say they sent me back to the drawing board....my previous attempts pale in comparison.