Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

RE; Wife said buy abigger lathe

Posts

RE; Wife said buy abigger lathe

#1

RE; Wife said buy abigger lathe

Dave Anderson (Pac NW)

>Thank you to all who responded to my early post. After carefully reveiwing my budget, wants and need to keep the wife happy. I decided on the Jet 1642evs. The Woodworking Show hits Seattle area on April 28th. Last year the WMH Tool group (Jet and Powermatic Dist.) had some great show specials around $200 discount. That is if I can stand the wait

Thanks again

Dave

Re: RE; Wife said buy abigger lathe

#2

Re: RE; Wife said buy abigger lathe

RK in Milw

>Dave, you will love the 1642EVS. I am very happy with mine. My lovely wife gave me one for my birthday last October.

You are gonna have some fun!

Re: RE; Wife said buy abigger lathe

#3

JL

Re: RE; Wife said buy abigger lathe

JL

>Dominic has a nice plan for a ballast box in the articles section. I took his plan and lowered it a bit and put a drawer unit on top. This adds weight and gives you storage for things. I've got bags of gravel in mine.

Re: RE; Wife said buy abigger lathe

#4

Nice choice, I love mine

Bernie

>

Re: RE; Wife said buy abigger lathe

#5

Listen To Your Wife ! ! !

Barry Turner

>

Re: RE; Wife said buy abigger lathe

#6

Small hijack PM3520

Bob Fawcett

>Do any of you that chose the jet1642EVS wish you had gotten a Powermatic 3520? If price was the same for both?

I am considering both and wonder if I would ever wish I had chosen the PM if I chose the Jet.

Re: RE; Wife said buy abigger lathe

#7

Re: Small hijack PM3520

RK in Milw

>The only major difference from what I can tell is the extra 4" capacity you get with the Powermatic. Given the difference in price, I am very happy with the Jet. I don't cut my own wood yet so I haven't come close to using the 16 inch capacity of the Jet. I did get the 2 hp motor because Woodcraft gave me the same price as for the 1 1/2 hp model, so that was a pretty good deal.

Ron

Re: RE; Wife said buy abigger lathe

#8

Re: Small hijack PM3520

JKJ in East TN

>I have not yet run into any limitiations of the 1642 - plenty of power, good controls, huge capacity if you run the headstock to the end of the bed. As I mentioned earlier, I'm considering buying a second one when I get my shop built.

If I remember correctly what I read here, the 3520 doesn't have a spindle indexer. The 1642 has one after a fashion - a pin inserted into holes to lock the spindle at various angles. (Perhaps the newer version of the 3520 has this or some other indexer.)

JKJ

Re: RE; Wife said buy abigger lathe

#9

Re: Small hijack PM3520

Rick Davenport

>Actually, the two are quite different.

And from everything I read when I researched my buying decision, both are darn good pieces of equipment.

The real key is whether you expect to need a larger lathe with the extra 300 pounds and substantial size difference that goes along with it.

If you can physically check the two out you may be able to make a better decision that fits your needs.

By the way, the new 3520b does have an indexer, if that is relevant to your decision.

You can't lose either way.

Rick

Re: RE; Wife said buy abigger lathe

#10

JL

Re: Small hijack PM3520

JL

>I like the 1642 EVS. If I would have had my druthers, I might have gone for a 2 hp. If the PM3520B were the same price would I buy it - probably - but only if I could get the extension at a reasonable price. I like having 42" between centers for stiles and legs.

Re: RE; Wife said buy abigger lathe

#11

Re: Small hijack PM3520

LT

>Bob,

I recently purchased a 3520B. I'm extremely pleased. It's very powerful, smooth and quiet. With 20" of swing, I doubt I will ever outgrow it, which was one of the deciding factors. From everything I have read, the Jet 1642 is a great machine and would be an excellent choice. But, if the price differential is not a deciding factor, go with the 3520B.

Somebody once said, "You can turn a small item on a big lathe, but not the other way around."

Re: RE; Wife said buy abigger lathe

#12

Thanks everyone!

Bob Fawcett

>