Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Turning Sapele.

Posts

Turning Sapele.

#1

Turning Sapele.

Nick Tuzzolino

>I want to make and turn some rings for a segmented bowl. Any experiences turning sapele? It looks a lot like wenge structurally, and was wondering about tearout. I may have to make a trial piece. but thought I'd ask first. I had a bad experience with wenge.

Re: Turning Sapele.

#2

JL

Re: Turning Sapele.

JL

>Sapele turns reasonably well. It is not as prone to tearout as Wenge. It is hard! Keep your tools sharp. I love the luminosity of the lighter streaks.


img

Re: Turning Sapele.

#3

Re: Turning Sapele.

Nick Tuzzolino

>JL: Beautiful dish. That sure answers my question. The luminosity is what I really love about sapele. Thanks!!

Re: Turning Sapele.

#4

Re: Turning Sapele.

Mike Rubes, Apex, NC

>Hi Nick,

I've turned a bit of sapele and really like it. It turns a lot like mahogany, if you've tried that. Endgrain tearout can be harsh, but I've found that wetting the wood with mineral oil before the last cut and then again when sanding at the lower grits can really produce a nice effect. Well worth the effort. Also, I really like the smell of sapele turning!

Here's a pic of one I did a few years ago. It's only about 6 inches across, 2 inches high and about 1/16 inch thick. Nice "ribbons" as well.








Good luck, let's see a pic when you are done!

Mike

Lathe still in the closet in Apex, NC...

Re: Turning Sapele.

#5

D'uoh!! Hit "post" instead of "preview" :)

Mike Rubes, Apex, NC

>Here's the pic: