Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Small turning tools *LINK*

Posts

Small turning tools *LINK*

#1

Leo Van Der Loo

Small turning tools *LINK*

Leo Van Der Loo

>Someone had asked to put up pic's of the tools I use to turn the small stuff, so here's some pictures from the tools I use to turn the small boxes and hollow forms, as the tools commonly for sale are way to large for micro turning, I make the tools myself from whatever I have in my shop, or buy some steel that is low cost and will do the job.

Scrapped sewing machines, printers, typewriters etc. have thin steel rods that will do for some tools, and solid car antenna make for a tough thin rod to use, than concrete nails and chrome vanadium steel as used in screwdriver bits and allan wrenches also can be used to make the larger tools.

A brazing or propane torch, pliers and hammer and anvil is all that's needed to shape the material to your need.

Have fun and take care

Leo Van Der Loo


img

http://homepage.mac.com/l.vanderloo/PhotoAlbum28.html

Re: Small turning tools *LINK*

#2

Leo Van Der Loo

closer look 

Leo Van Der Loo

>


img

Re: Small turning tools *LINK*

#3

Leo Van Der Loo

one more 

Leo Van Der Loo

>


img

Re: Small turning tools *LINK*

#4

Leo Van Der Loo

one more look 

Leo Van Der Loo

>


img

Re: Small turning tools *LINK*

#5

Leo Van Der Loo

last one 

Leo Van Der Loo

>


img

Re: Small turning tools *LINK*

#6

Re: last one

Stephen Mushinski

>Leo,

Excellant post! Thank You.

Re: Small turning tools *LINK*

#7

I'm hoping you don't work for the CIA.

Eddie Pacheco; San Jose, Ca.

>Nice varied assortment of mini turning tools. Thank you for posting this.

Re: Small turning tools *LINK*

#8

JL

Re: Tiniest gouges I ever saw!

JL

>

Re: Small turning tools *LINK*

#9

The last time I saw tools like that.....

Thomas Skaggs, Foothills of Mount Level

>....they were hanging out of my mouth. Are you a dentist? ;-)

Tommy

Re: Small turning tools *LINK*

#10

Took another wide eyed 2nd look,

Eddie Pacheco; San Jose, Ca.

>Leo,

Are you the one that said you had made the small gouges out of 1/8" roll pins? I see the small (I guess tiny) gouges and now the info is starting to click. Very clever on using the hex phillips/flat blade diver inserts for making your tools. These are rather inexpensive and are of good steel. Do you also grind the nails to make cutting tools? Do the ground edges last on them? While I had read the many posts on the mini tools, I had only seen what was avaiable from the catalog. Your photos answer a lot of questions and provide a lot of ideas. Thanks!

Re: Small turning tools *LINK*

#11

Thanks for posting.

Craig Daymon

>Leo,

Thanks for posting the pics. Obviously an extensive variety is needed for such delicate work. Very impressive collection.

-Craig

P.S. "Yes, it's safe, very safe." (Dustin Hoffman - Marathon Man)

Re: Small turning tools *LINK*

#12

Re: Took another wide eyed 2nd look,

John Lucas

>Eddie I have made some small gouges out of roll pins but I've found that from 1/8" on down to smaller sizes if you just polish the top and don't grind a flute it will cut just as well. Apparently wood, plastic and Tagua nuts don't respond to the cut the same way at this size. When I make small gouge tools now I simply grind the top to create a negative rake that sort of looks like an Ellsworth grind if you look at it from the side. Then I polish this up to 600 grit. Then I grind the sides in a traditional bowl gouge profile. I use a dremel with a 1" abrasive wheel. I mount the dremel in a vice and then freehand the grind on the tool.

Re: Small turning tools *LINK*

#13

Leo Van Der Loo

How many tools ?? *LINK*

Leo Van Der Loo

>Hi Craig

I don't know that you do need that many different tools, it's just that if I have a problem I blame the tool and make another one, Big grin here

It also helps that they don't cost a lot.

Have fun and take care

Leo Van Der Loo


http://homepage.mac.com/l.vanderloo/PhotoAlbum4.html

Re: Small turning tools *LINK*

#14

Leo Van Der Loo

Re: Took another wide eyed 2nd look, *LINK*

Leo Van Der Loo

>Hi Eddy

No I have never used the roll pins, I consider the steel pretty soft, and they are really short usually, the way those are used they perform more like shear scrapers.

The small gouges I made, are made from hollow sewing machine shafts, pretty good steel, and they cut like a larger bowl/spindle gouge.

The concrete nails are heated and hammered into shape and rough ground, heated again and water cooled, then finish ground, and yes they keep their edge very well.

The screwdriver bits are the same steel as used for the good allan wrenches, cost for the 6" long ones is about $1.-- around here and using them in the quick exchange handle saves in having to make and store and find even more tools.

Have fun and take care

Leo Van Der Loo


http://homepage.mac.com/l.vanderloo/PhotoAlbum25.html